This has been causing some issues with the submission review on Firefox
store: we use OS-level paths in these source maps, which makes the build
artifact different from the one that's been submitted.
Also saves ~100Kb for main.js artifact.
If there is a large owner stack, we could potentially spam multiple
fetch requests for the same source map. This adds a simple deduplication
logic, based on URL.
Also, this adds a timeout of 60 seconds to all fetch requests initiated
by fileFetcher content script.
This fixes the displaying of "rendered by" section if owner stacks
contained any native frames. This regressed after
https://github.com/facebook/react/pull/34185, where we added the
Suspense boundary for the StackTraceView.
This fails because the Promise that is responsible for symbolication of
the source is never getting resolved or rejected.
Previously, we would just throw an Error without sending a corresponding
message to the `main` script, and it would just cache a Promise that is
never resolved, hence the Suspense boundary for "rendered by" section is
never resolved.
In a separate change, I think we need to update StackTraceView component
to display `native` as location, instead of `:0`:
<img width="712" height="118" alt="Screenshot 2025-08-20 at 00 20 42"
src="https://github.com/user-attachments/assets/c79735c9-fdd2-467c-96cd-2bc29d38c4e0"
/>
Stacked on #33983.
Allow React to be configured as the default handler of all links in
Chrome DevTools. To do this you need to configure the Chrome DevTools
setting for "Link Handling:" to be set to "React Developer Tools". By
default this doesn't do anything but if you then check the box added in
#33983 it starts open local files directly in the external editor.
This needs docs to show how to enable that option.
(As far as I can tell this broke in Chrome Canary 🙄 but hopefully fixed
before stable.)
When the browser theme changes, we don't immediately rerender the UI so
we don't pick up the new theme if the React devtools are set to auto.
This picks up the change immediately.
The `useOpenResource` hook is now used to open links. Currently, the
`<>` icon for the component stacks and the link in the bottom of the
components stack. But it'll also be used for many new links like stacks.
If this new option is configured, and this is a local file then this is
opened directly in the external editor. Otherwise it fallbacks to open
in the Sources tab or whatever the standalone or inline is configured to
use.
<img width="453" height="252" alt="Screenshot 2025-07-24 at 4 09 09 PM"
src="https://github.com/user-attachments/assets/04cae170-dd30-4485-a9ee-e8fe1612978e"
/>
I prominently surface this option in the Source pane to make it
discoverable.
<img width="588" height="144" alt="Screenshot 2025-07-24 at 4 03 48 PM"
src="https://github.com/user-attachments/assets/0f3a7da9-2fae-4b5b-90ec-769c5a9c5361"
/>
When this is configured, the "Open in Editor" is hidden since that's
just the default. I plan on deprecating this button to avoid having the
two buttons going forward.
Notably there's one exception where this doesn't work. When you click an
Action or Event listener it takes you to the Sources tab and you have to
open in editor from there. That's because we use the `inspect()`
mechanism instead of extracting the source location. That's because we
can't do the "throw trick" since these can have side-effects. The Chrome
debugger protocol would solve this but it pops up an annoying dialog. We
could maybe only attach the debugger only for that case. Especially if
the dialog disappears before you focus on the browser again.
I broke Firefox DevTools extension in #33968.
It turns out the Firefox has a placeholder object for the sources panel
which is empty. We need to detect the actual event handler.
This adds a "Code Editor" pane for the Chrome extension in the bottom
right corner of the "Sources" panel. If you end up getting linked to the
"Sources" panel from stack traces in console, performance tab, stacks in
React Component tab like the one added in #33954 basically everywhere
there's a link to source code. Then going from there to open in a code
editor should be more convenient. This adds a button to open the current
file.
<img width="1387" height="389" alt="Screenshot 2025-07-22 at 10 22
19 PM"
src="https://github.com/user-attachments/assets/fe01f84c-83c2-4639-9b64-4af1a90c3f7d"
/>
This only makes sense in the extensions since in standalone it needs to
always open by default in an editor. Unfortunately Firefox doesn't
support extending the Sources panel.
Chrome is also a bit buggy where it doesn't send a selection update
event when you switch tabs in the Sources panel. Only when the actual
cursor position changes. This means that the link can be lagging behind
sometimes. We also have some general bugs where if React DevTools loses
connection it can break the UI which includes this pane too.
This has a small inline configuration too so that it's discoverable:
<img width="559" height="143" alt="Screenshot 2025-07-22 at 10 22 42 PM"
src="https://github.com/user-attachments/assets/1270bda8-ce10-4f9d-9fcb-080c0198366a"
/>
<img width="527" height="123" alt="Screenshot 2025-07-22 at 10 22 30 PM"
src="https://github.com/user-attachments/assets/45848c95-afd8-495f-a7cf-eb2f46e698f2"
/>
Since we can't add a separate link to open-in-editor or open-in-sources
everywhere I plan on adding an option to open in editor by default in a
follow up. That option needs to be even more discoverable.
I moved the configuration from the Components settings to the General
settings since this is now a much more general features for opening
links to resources in all types of panes.
<img width="673" height="311" alt="Screenshot 2025-07-22 at 10 22 57 PM"
src="https://github.com/user-attachments/assets/ea2c0871-942c-4b55-a362-025835d2c2bd"
/>
In RSC and other stacks now we use a lot of `ReactFunctionLocation` type
to represent the location of a function. I.e. the location of the
beginning of the function (the enclosing line/col) that is represented
by the "Source" of the function. This is also what the parent Component
Stacks represents.
As opposed to `ReactCallSite` which is what normal stack traces and
owner stacks represent. I.e. the line/column number of the callsite into
the next function.
We can start sharing more code by using the `ReactFunctionLocation` type
to represent the component source location and it also helps clarify
which ones are function locations and which ones are callsites as we
start adding more stack traces (e.g. for async debug info and owner
stack traces).
Related: https://github.com/facebook/react/pull/31342
This fixes RDT behaviour when some DOM element was pre-selected in
built-in browser's Elements panel, and then Components panel of React
DevTools was opened for the first time. With this change, React DevTools
will correctly display the initial state of the Components Tree with the
corresponding React Element (if possible) pre-selected.
Previously, we would only subscribe listener when `TreeContext` is
mounted, but this only happens when user opens one of React DevTools
panels for the first time. With this change, we keep state inside
`Store`, which is created when Browser DevTools are opened. Later,
`TreeContext` will use it for initial state value.
Planned next changes:
1. Merge `inspectedElementID` and `selectedElementID`, I have no idea
why we need both.
2. Fix issue with `AutoSizer` rendering a blank container.
Stacked on https://github.com/facebook/react/pull/31131. See last
commit.
This is a clean-up and a pre-requisite for next changes:
1. `ReloadAndProfileConfig` is now split into boolean value and settings
object. This is mainly because I will add one more setting soon, and
also because settings might be persisted for a longer time than the flag
which signals if the Backend was reloaded for profiling. Ideally, this
settings should probably be moved to the global Hook object, same as we
did for console patching.
2. Host is now responsible for reseting the cached values, Backend will
execute provided `onReloadAndProfileFlagsReset` callback.
Based on https://github.com/facebook/react/pull/31049, credits to
@EdmondChuiHW.
What is happening here:
1. Once Agent is destroyed, unsubscribe own listeners and bridge
listeners.
2. [Browser extension only] Once Agent is destroyed, unsubscribe
listeners from BackendManager.
3. [Browser extension only] I've discovered that `backendManager.js`
content script can get injected multiple times by the browser. When
Frontend is initializing, it will create Store first, and then execute a
content script for bootstraping backend manager. If Frontend was
destroyed somewhere between these 2 steps, Backend won't be notified,
because it is not initialized yet, so it will not unsubscribe listeners
correctly. We might end up duplicating listeners, and the next time
Frontend is launched, it will report an issues "Cannot add / remove node
...", because same operations are emitted twice.
To reproduce 3 you can do the following:
1. Click reload-to-profile
2. Right after when both app and Chrome DevTools panel are reloaded,
close Chrome DevTools.
3. Open Chrome DevTools again, open Profiler panel and observe "Cannot
add / remove node ..." error in the UI.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
In preparation to support reload-to-profile in Fusebox (#31021), we need
a way to check capability of different backends, e.g. web vs React
Native.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
* Default, e.g. existing web impl = no-op
* Custom impl: is called
Stacked on https://github.com/facebook/react/pull/30610 and whats under
it. See [last
commit](248ddba186).
Now, we are using
[`chrome.storage`](https://developer.chrome.com/docs/extensions/reference/api/storage)
to persist settings for the browser extension across different sessions.
Once settings are updated from the UI, the `Store` will emit
`settingsUpdated` event, and we are going to persist them via
`chrome.storage.local.set` in `main/index.js`.
When hook is being injected, we are going to pass a `Promise`, which is
going to be resolved after the settings are read from the storage via
`chrome.storage.local.get` in `hookSettingsInjector.js`.
The current state is that `rendererInterface`, which contains all the
backend logic, like generating component stack or attaching errors to
fibers, or traversing the Fiber tree, ..., is only mounted after the
Frontend is created.
For browser extension, this means that we don't patch console or track
errors and warnings before Chrome DevTools is opened.
With these changes, `rendererInterface` is created right after
`renderer` is injected from React via global hook object (e. g.
`__REACT_DEVTOOLS_GLOBAL_HOOK__.inject(...)`.
Because of the current implementation, in case of multiple Reacts on the
page, all of them will patch the console independently. This will be
fixed in one of the next PRs, where I am moving console patching to the
global Hook.
This change of course makes `hook.js` script bigger, but I think it is a
reasonable trade-off for better DevX. We later can add more heuristics
to optimize the performance (if necessary) of `rendererInterface` for
cases when Frontend was connected late and Backend is attempting to
flush out too many recorded operations.
This essentially reverts https://github.com/facebook/react/pull/26563.
This reverts #19603.
Before:
<img width="724" alt="Screenshot 2024-08-28 at 12 07 29 AM"
src="https://github.com/user-attachments/assets/0613088f-c013-4f1c-92c3-fbdae8c1f109">
After:
<img width="771" alt="Screenshot 2024-08-28 at 12 08 13 AM"
src="https://github.com/user-attachments/assets/eef21bee-d11f-4f0a-9147-053a163f720f">
Consensus seems to be that while the purple on is a bit clearer and
easier to read. The purple is not on brand so it doesn't look like
React. It looks ugly. It's distracting (too eye catching). Taking away
attention from other tabs in an unfair way.
It also gets worse with more tabs added. We plan on both adding another
tab and panes inside other tabs (elements/sources) soon. Each needs to
be marked somehow as part of React but spelling it out is too long.
Putting inside a second tab means two clicks and takes away real-estate
from our extension and doesn't solve the problem with extension panes in
other tabs. We also plan on adding multiple different tracks to the
Performance tab which also needs a name other than just React and
spelling out React as a prefix is too long. The Emoji is too
distracting. So it seems best to uniformly apply the symbol - albeit it
might just look like a dot to many.
Dark mode looks close to on brand:
<img width="1089" alt="Screenshot 2024-08-28 at 12 32 50 AM"
src="https://github.com/user-attachments/assets/7175a540-4241-4c26-9e4d-4d367873af57">
Firefox [finally supports
`ExecutionWorld.MAIN`](https://bugzilla.mozilla.org/show_bug.cgi?id=1736575)
in content scripts, which means we can migrate the browser extension to
Manifest V3.
This PR also removes a bunch of no longer required explicit branching
for Firefox case, when we are using Manifest V3-only APIs.
We are also removing XMLHttpRequest injection, which is no longer needed
and restricted in Manifest V3. The new standardized approach (same as in
Chromium) doesn't violate CSP rules, which means that extension can
finally be used for apps running in production mode.
I noticed that there is a delay due to the inspection being split into
one part that gets the attribute and another eval that does the
inspection. This is a bit hacky and uses temporary global names that are
leaky. The timeout was presumably to ensure that the first step had
fully propagated but it's slow. As we've learned, it can be throttled,
and it isn't a guarantee either way.
Instead, we can just consolidate these into a single operation that
by-passes the bridge and goes straight to the renderer interface from
the eval.
I did the same for the viewElementSource helper even though that's not
currently in use since #28471 but I think we probably should return to
that technique when it's available since it's more reliable than the
throw - at least in Chrome. I'm not sure about the status of React
Native here. In Firefox, inspecting a function with source maps doesn't
seem to work. It doesn't jump to original code.
Stacked on #30490.
This is in the same spirit but to clarify the difference between what is
React Native vs part of any generic Host. We used to use "Native" to
mean three different concepts. Now "Native" just means React Native.
E.g. from the frontend's perspective the Host can be
Highlighted/Inspected. However, that in turn can then be implemented as
either direct DOM manipulation or commands to React Native. So frontend
-> backend is "Host" but backend -> React Native is "Native" while
backend -> DOM is "Web".
Rename NativeElementsPanel to BuiltinElementsPanel. This isn't a React
Native panel but one part of the surrounding DevTools. We refer to Host
more as the thing running React itself. I.e. where the backend lives.
The runtime you're inspecting. The DevTools itself needs a third term.
So I went with "Builtin".
I need to start clarifying where things are really actually Fibers and
where they're not since I'm adding Server Components as a separate type
of component instance which is not backed by a Fiber.
Nothing in the front end should really know anything about what kind of
renderer implementation we're inspecting and indeed it's already not
always a "Fiber" in the legacy renderer.
We typically refer to this as a "Component Instance" but the front end
currently refers to it as an Element as it historically grew from the
browser DevTools Elements tab.
I also moved the renderer.js implementation into the `backend/fiber`
folder. These are at the same level as `backend/legacy`. This clarifies
that anything outside of this folder ideally shouldn't refer to a
"Fiber".
console.js and profilingHooks.js unfortunately use Fibers a lot which
needs further refactoring. The profiler frontend also uses the term
alot.
## Summary
There is a race condition in the way we poll if React is on the page and
when we actually clear this polling instance. When user navigates to a
different page, we will debounce a callback for 500ms, which will:
1. Cleanup previous React polling instance
2. Start a new React polling instance
Since the cleanup logic is debounced, there is a small chance that by
the time we are going to clean up this polling instance, it will be
`eval`-ed on the page, that is using React. For example, when user is
navigating from the page which doesn't have React running, to a page
that has React running.
Next, we incorrectly will try to mount React DevTools panels twice,
which will result into conflicts in the Store, and the error will be
shown to the user
## How did you test this change?
Since this is a race condition, it is hard to reproduce consistently,
but you can try this flow:
1. Open a page that is using React, open browser DevTools and React
DevTools components panel
2. Open a page that is NOT using React, like google.com, wait ~5 seconds
until you see `"Looks like this page doesn't have React, or it hasn't
been loaded yet"` message in RDT panel
3. Open a page that is using React, observe the error `"Uncaught Error:
Cannot add node "1" because a node with that id is already in the
Store."`
Couldn't been able to reproduce this with these changes.
## Summary
1. RDT browser extension's content scripts will now ship source maps
(without source in prod, to save some bundle size).
2. `installHook` content script will be ignore listed via `ignoreList`
field in the corresponding source map.
3. Previously, source map for backend file used `x_google_ignoreList`
naming, now `ignoreList`.
## How did you test this change?
1. `ignoreList-test.js`
2. Tested manually that I don't see `installHook` in stack traces when
`console.error` is called.
Stacked on https://github.com/facebook/react/pull/28351, please review
only the last commit.
Top-level description of the approach:
1. Once user selects an element from the tree, frontend asks backend to
return the inspected element, this is where we simulate an error
happening in `render` function of the component and then we parse the
error stack. As an improvement, we should probably migrate from custom
implementation of error stack parser to `error-stack-parser` from npm.
2. When frontend receives the inspected element and this object is being
propagated, we create a Promise for symbolicated source, which is then
passed down to all components, which are using `source`.
3. These components use `use` hook for this promise and are wrapped in
Suspense.
Caching:
1. For browser extension, we cache Promises based on requested resource
+ key + column, also added use of
`chrome.devtools.inspectedWindow.getResource` API.
2. For standalone case (RN), we cache based on requested resource url,
we cache the content of it.
1.
9fc04eaf3f (diff-2c5e1f5e80e74154e65b2813cf1c3638f85034530e99dae24809ab4ad70d0143)
introduced a vulnerability: we listen to `'fetch-file-with-cache'` event
from `window` to fetch sources of the file, in which we want to parse
hook names. We send this event via `window`, which means any page can
also use this and manipulate the extension to perform some `fetch()`
calls. With these changes, instead of transporting message via `window`,
we have a distinct content script, which is responsible for fetching
sources. It is notified via `chrome.runtime.sendMessage` api, so it
can't be manipulated.
2. Consistent structure of messages `{source: string, payload: object}`
in different parts of the extension
3. Added some wrappers around `chrome.scripting.executeScript` API in
`packages/react-devtools-extensions/src/background/executeScript.js`,
which support custom flow for Firefox, to simulate support of
`ExecutionWorld.MAIN`.
Changes:
1. [Firefox-only] For some reason, Firefox might try to inject
dynamically registered content script in pages like `about:blank`. I
couldn't find a way to change this behaviour, `about:` is not a valid
scheme, so we can't exclude it and `match_about_blank` flag is not
supported in `chrome.scripting.registerContentScripts`.
2. While navigating the history in Firefox, some content scripts might
not be re-injected and still be alive. To handle this, we are now
patching `window` with `__REACT_DEVTOOLS_PROXY_INJECTED__` flag, to make
sure that proxy is injected and only once. This flag is cleared on
`pagehide` event.
Changes:
1. Refactored react polling logic, now each `.eval()` call is wrapped in
Promise, so we can chain them properly.
2. When user has browser DevTools opened and React DevTools panels were
mounted, user might navigate to the page, which doesn't have React
running. Previously, we would show just blank white page, now we will
show disclaimer. Disclaimer appears after 5 failed attempts to find
React. We will also show this disclaimer if it takes too long to load
the page, but once any React instance is loaded and registered, we will
update the panels.
3. Dark theme support for this disclaimer and popups in Firefox &
Chromium-based browsers
**Important**: this is only valid for case when React DevTools panels
were already created, like when user started debugging React app and
then switched to non-React page. If user starts to debug non-React app
(by opening browser DevTools for it), we will not create these panels,
just like before.
Q: "Why do we poll to get information about react?"
A: To handle case when react is loaded after the page has been loaded,
some sandboxes for example.
| Before | After |
| --- | --- |
| <img width="1840" alt="Screenshot 2023-09-14 at 15 37 37"
src="https://github.com/facebook/react/assets/28902667/2e6ffb39-5698-461d-bfd6-be2defb41aad">
| <img width="1840" alt="Screenshot 2023-09-14 at 15 26 16"
src="https://github.com/facebook/react/assets/28902667/1c8ad2b7-0955-41c5-b8cc-d0fdb03e13ca">
|
Some context:
- When user selects an element in tree inspector, we display current
state of the component. In order to display really current state, we
start polling the backend to get available updates for the element.
Previously:
- Straight-forward sending an event to get element updates each second.
Potential race condition is not handled in any form.
- If user navigates from the page, timeout wouldn't be cleared and we
would potentially throw "Timed out ..." error.
- Bridge disconnection is not handled in any form, if it was shut down,
we could spam with "Timed out ..." errors.
With these changes:
- Requests are now chained, so there can be a single request at a time.
- Handling both navigation and shut down events.
This should reduce the number of "Timed out ..." errors that we see in
our logs for the extension. Other surfaces will also benefit from it,
but not to the full extent, as long as they utilize
"resumeElementPolling" and "pauseElementPolling" events.
Tested this on Chrome, running React DevTools on multiple tabs,
explicitly checked the case when service worker is in idle state and we
return back to the tab.
- Instead of reconnecting ports from devtools page and proxy content
script, now handling their disconnection properly
- `proxy.js` is now dynamically registered as a content script, which
loaded for each page. This will probably not work well for Firefox,
since we are still on manifest v2, I will try to fix this in the next
few PRs.
- Handling the case when devtools page port was reconnected and bridge
is still present. This could happen if user switches the tab and Chrome
decides to kill service worker, devtools page port gets disconnected,
and then user returns back to the tab. When port is reconnected, we
check if bridge message listener is present, connecting them if so.
- Added simple debounce when evaluating if page has react application
running. We start this check in `chrome.network.onNavigated` listener,
which is asynchronous. Also, this check itself is asynchronous, so
previously we could mount React DevTools multiple times if navigates
multiple times while `chrome.devtools.inspectedWindow.eval` (which is
also asynchronous) can be executed.
00b7c43318/packages/react-devtools-extensions/src/main/index.js (L575-L583)https://github.com/facebook/react/assets/28902667/9d519a77-145e-413c-b142-b5063223d073
`chrome.devtools.inspectedWindow.eval` is asynchronous, so using it in
`setInterval` is a mistake.
Sometimes this results into mounting React DevTools twice, and user sees
errors about duplicated fibers in store.
With these changes, `executeIfReactHasLoaded` executed recursively with
a threshold (in case if page doesn't have react).
Although we minimize the risk of mounting DevTools twice here, this
approach is not the best way to have this problem solved. Dumping some
thoughts and ideas that I've tried, but which are out of the scope for
this release, because they can be too risky and time-consuming.
Potential changes:
- Have 2 content scripts:
- One `prepareInjection` to notify service worker on renderer attached
- One which runs on `document_idle` to finalize check, in case if there
is no react
- Service worker will notify devtools page that it is ready to mount
React DevTools panels or should show that there is no React to be found
- Extension port from devtools page should be persistent and connected
when `main.js` is executed
- Might require refactoring the logic of how we connect devtools and
proxy ports
Some corner cases:
- Navigating to restricted pages, like `chrome://<something>` and back
- When react is lazily loaded, like in an attached iframe, or just
opened modal
- In-tab navigation with pre-cached pages, I think only Chrome does it
- Firefox is still on manifest v2 and it doesn't allow running content
scripts in ExecutionWorld.MAIN, so it requires a different approach
Multiple `chrome.panels.create` calls result into having duplicate
panels created in Firefox, these changes fix that.
Now calling `chrome.panels.create` only if there are no panels created
yet.
This is mostly hotfix for https://github.com/facebook/react/pull/27215.
Contains 3 fixes:
- Handle cases when `react` is not loaded yet and user performs in-tab
navigation. Previously, because of the uncleared interval we would try
to mount DevTools twice, resulting into multiple errors.
- Handle case when extension port disconnected (probably by the browser
or just due to its lifetime)
- Removed duplicate `render()` call on line 327
Fixes https://github.com/facebook/react/issues/27119,
https://github.com/facebook/react/issues/27185.
Fixed:
- React DevTools now works as expected when user performs in-tab
navigation, previously it was just stuck.
https://github.com/facebook/react/assets/28902667/b11c5f84-7155-47a5-8b5a-7e90baca5347
- When user closes browser DevTools panel, we now do some cleanup to
disconnect ports and emit shutdown event for bridge. This should fix the
issue with registering duplicated fibers with the same id in Store.
Changed:
- We reconnect proxy port once in 25 seconds, in order to [keep service
worker
alive](https://developer.chrome.com/docs/extensions/whatsnew/#m110-sw-idle).
- Instead of unregistering dynamically injected content scripts, wen now
get list of already registered scripts and filter them out from scripts
that we want to inject again, see dynamicallyInjectContentScripts.js.
- Split `main.js` and `background.js` into multiple files.
Tested on Chromium and Firefox browsers.
Fixes https://github.com/facebook/react/issues/26911,
https://github.com/facebook/react/issues/26860.
Currently, we are parsing user agent string to determine which browser
is running the extension. This doesn't work well with custom user
agents, and sometimes when user turns on mobile dev mode in Firefox, we
stop resolving that this is a Firefox browser, extension starts to use
Chrome API's and fails to inject.
Changes:
Since we are building different extensions for all supported browsers
(Chrome, Firefox, Edge), we predefine env variables for browser
resolution, which are populated in a build step.
Suppose that you have this setup for devtools test:
```
// @reactVersion <= 18.1
// @reactVersion >= 17.1
```
With previous implementation, the accumulated condition will be `"<=
18.1" && ">= 17.1"`, which is just `">= 17.1"`, when evaluated. That's
why we executed some tests for old versions of react on main (and
failed).
With these changes the resulting condition will be `"<= 18.1 >= 17.1"`,
not using `&&`, because semver does not support this operator. All
currently failing tests will be skipped now as expected.
Also increased timeout value for shell server to start
