Depends on:
- #28317
- #28320
---
Changes the behavior of the JSX runtime to pass through `ref` as a
normal prop, rather than plucking it from the props object and storing
on the element.
This is a breaking change since it changes the type of the receiving
component. However, most code is unaffected since it's unlikely that a
component would have attempted to access a `ref` prop, since it was not
possible to get a reference to one.
`forwardRef` _will_ still pluck `ref` from the props object, though,
since it's extremely common for users to spread the props object onto
the inner component and pass `ref` as a differently named prop. This is
for maximum compatibility with existing code — the real impact of this
change is that `forwardRef` is no longer required.
Currently, refs are resolved during child reconciliation and stored on
the fiber. As a result of this change, we can move ref resolution to
happen only much later, and only for components that actually use them.
Then we can remove the `ref` field from the Fiber type. I have not yet
done that in this step, though.
All our sources are considered third party and should be hidden in stack
traces unless expanded. Our internals aren't actionable anyway.
This doesn't really do much without tooling that actually forwards this
to new generated source maps, in which case they probably just add them
to ignorelist anyway.
We could in theory actually support this case by throwing a Promise when
it's used inside a render. Allowing it to be synchronously unwrapped.
However, it's a bit sketchy because we officially only support this in
the render's child position or in `use()`.
Another alternative could be to actually pass the Promise/Lazy to the
callback so that you can reason about it and just return it again or
even unwrapping with `use()` - at least for the forEach case maybe.
This adds a new DEV-only row type `D` for DebugInfo. If we see this in
prod, that's an error. It can contain extra debug information about the
Server Components (or Promises) that were compiled away during the
server render. It's DEV-only since this can contain sensitive
information (similar to errors) and since it'll be a lot of data, but
it's worth using the same stream for simplicity rather than a
side-channel.
In this first pass it's just the Server Component's name but I'll keep
adding more debug info to the stream, and it won't always just be a
Server Component's stack frame.
Each row can get more debug rows data streaming in as it resolves and
renders multiple server components in a row.
The data structure is just a side-channel and it would be perfectly fine
to ignore the D rows and it would behave the same as prod. With this
data structure though the data is associated with the row ID / chunk, so
you can't have inline meta data. This means that an inline Server
Component that doesn't get an ID otherwise will need to be outlined. The
way I outline Server Components is using a direct reference where it's
synchronous though so on the client side it behaves the same (i.e.
there's no lazy wrapper in this case).
In most cases the `_debugInfo` is on the Promises that we yield and we
also expose this on the `React.Lazy` wrappers. In the case where it's a
synchronous render it might attach this data to Elements or Arrays
(fragments) too.
In a future PR I'll wire this information up with Fiber to stash it in
the Fiber data structures so that DevTools can pick it up. This property
and the information in it is not limited to Server Components. The name
of the property that we look for probably shouldn't be `_debugInfo`
since it's semi-public. Should consider the name we use for that.
If it's a synchronous render that returns a string or number (text node)
then we don't have anywhere to attach them to. We could add a
`React.Lazy` wrapper for those but I chose to prioritize keeping the
data structure untouched. Can be useful if you use Server Components to
render data instead of React Nodes.
Instead of createElement.
We should have done this when we initially released jsx-runtime but
better late than never. The general principle is that our tests should
be written using the most up-to-date idioms that we recommend for users,
except when explicitly testing an edge case or legacy behavior, like for
backwards compatibility.
Most of the diff is related to tweaking test output and isn't very
interesting.
I did have to workaround an issue related to component stacks. The
component stack logic depends on shared state that lives in the React
module. The problem is that most of our tests reset the React module
state and re-require a fresh instance of React, React DOM, etc. However,
the JSX runtime is not re-required because it's injected by the compiler
as a static import. This means its copy of the shared state is no longer
the same as the one used by React, causing any warning logged by the JSX
runtime to not include a component stack. (This same issue also breaks
string refs, but since we're removing those soon I'm not so concerned
about that.) The solution I went with for now is to mock the JSX runtime
with a proxy that re-requires the module on every function invocation. I
don't love this but it will have to do for now. What we should really do
is migrate our tests away from manually resetting the module state and
use import syntax instead.
Server Context was never documented, and has been deprecated in
https://github.com/facebook/react/pull/27424.
This PR removes it completely, including the implementation code.
Notably, `useContext` is removed from the shared subset, so importing it
from a React Server environment would now should be a build error in
environments that are able to enforce that.
Partially reverting what has been removed in
https://github.com/facebook/react/pull/28186.
We need `'scheduler/tracing'` mock for React >= 16.8.
The error:
```
Invariant Violation: It is not supported to run the profiling version of a renderer (for example, `react-dom/profiling`) without also replacing the `scheduler/tracing` module with `scheduler/tracing-profiling`. Your bundler might have a setting for aliasing both modules. Learn more at http://fb.me/react-profiling
```
Validated by running regression tests for the whole version matrix:
```
./scripts/circleci/download_devtools_regression_build.js 16.0 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 16.0 --ci && ./scripts/circleci/download_devtools_regression_build.js 16.5 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 16.5 --ci && ./scripts/circleci/download_devtools_regression_build.js 16.8 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 16.8 --ci && ./scripts/circleci/download_devtools_regression_build.js 17.0 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 17.0 --ci && ./scripts/circleci/download_devtools_regression_build.js 18.0 --replaceBuild && node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 18.0 --ci
```
- Moving `act` implementation to a single getter-function, which is
based on React version we are testing RDT against.
- Removing unused mocks for `act`, which were designed for legacy
versions of React, validated with running tests against React 16 build.
Adds a new entrypoint for the production jsx-runtime when using
react-server condition. Currently the entrypoints are the same but in
the future we will potentially change the implementation of the runtime
in ways that can only be optimized for react-server constraints and we
want to have the entrypoint already separated so environments using it
will be pulling in the right version
## Overview
Adds support for `ReactDOMClient` for `ServerIntegration*` tests.
Also converts tests that pass without any other changes. Will follow up
with other PRs for more complex cases.
There's no need to separate strict mode from strict effects mode any
more.
I didn't clean up the `StrictEffectMode` fiber flag, because it's used
to prevent strict effects in legacy mode. I could replace those checks
with `LegacyMode` checks, but when we remove legacy mode, we can remove
that flag and condense them into one StrictMode flag away.
Semantically if you make your reason for aborting a Postpone instance
the render should not hit the error pathways but should instead follow
the postpone pathways. It's awkward today to actually get your hands on
a Postpone instance because you have to catch the throw from postpone
and then pass that into `abort()` or `AbortController.abort()`
(depending on the renderer API you are using)
This change makes it so that in most circumstances if you abort with a
postpone the `onPostpone` handler will be called and the Suspense
boundaries still pending will be put into client render mode with the
appropriate postpone digest to avoid trigger recoverable error pathways
on the client.
Similar to postponing in the shell during a resume or render however if
you abort before the shell is complete in a resume or render we will
fatally error. The fatal error is contextualized by React to avoid
passing the postpone object itself to the `onError` and related options.
These were made dynamic again in
https://github.com/facebook/react/pull/27919, and already have the
dynamic flags set. It's a bummer to push this around, we should come up
with a better way.
The internal file ReactSharedSubset is what the `react` module resolves
to when imported from a Server Component environment. We gave it this
name because, originally, the idea was that Server Components can access
a subset of the APIs available on the client.
However, since then, we've also added APIs that can _only_ by accessed
on the server and not the client. In other words, it's no longer a
subset, it's a slightly different overlapping set.
So this commit renames ReactSharedSubet to ReactServer and updates all
the references. This does not affect the public API, only our internal
implementation.
This wires up the use of `async_hooks` in the Node build (as well as the
Edge build when a global is available) in DEV mode only. This will be
used to track debug info about what suspended during an RSC pass.
Enabled behind a flag for now.
I think these have been dead for a while now. If the purpose is
documentation, we should see if we need to improve `yarn test --help` or
something instead.
`hermes-parser` is recommended for all Flow files as it supports the
latest features. I noticed we were still using babel here.
Test Plan:
no diff in output before and after
Adds `isChildPublicInstance` method to both renderers (Fabric and
Paper), which will receive 2 public instances and return if first
argument is an ancestor of the second, based on fibers.
This will be used as a fallback when DOM node APIs are not available:
for Paper renderer or for Fabric without DOM node APIs.
How it is going to be used: to determine which `AppContainer` component
in RN is responsible for highlighting an inspected element on the
screen.
## Summary
Follow up from #27717 based on feedback to rename the fork module itself
## How did you test this change?
- `yarn build`
- `yarn test
packages/scheduler/src/__tests__/SchedulerUMDBundle-test.internal.js`
Co-authored-by: Jack Pope <jackpope@meta.com>
This PR adds a new FB-specific configuration of Flight. We also need to
bundle a version of ReactSharedSubset that will be used for running
Flight on the server.
This initial implementation does not support server actions yet.
The FB-Flight still uses the text protocol on the server (the flag
`enableBinaryFlight` is set to false). It looks like we need some
changes in Hermes to properly support this binary format.
## Summary
After changes in https://github.com/facebook/react/pull/27436, UMD
builds no longer expose Scheduler from ReactSharedInternals. This module
is forked in rollup for UMD builds and the path no longer matches. This
PR updates the path name to match the new module:
ReactSharedInternalsClient.
## How did you test this change?
- `yarn build`
- Inspect `react.development.js` UMD build, observe `Scheduler:
Scheduler` is set in `ReactSharedInternals`, matching
[18.2.0](https://unpkg.com/react@18.2.0/umd/react.development.js)
- ran attribute-behavior fixture app
- Observe no more error `Uncaught (in promise) TypeError: Cannot read
properties of undefined (reading 'unstable_cancelCallback')`
Co-authored-by: Jack Pope <jackpope@meta.com>
## Summary
I had to change the commands to be windows specific so that it doesn't
cause any crashes
## How did you test this change?
I successfully built the different types of devtools extenstions on my
personal computer. In future may need to add a github action with
windows config to test these errors
#27193
In order to make Haste work with React's artifacts, It is important to
keep headers in this format:
```
/**
* ...
...
* ...
*/
```
For optimization purposes, Closure compiler will actually modify these
headers by removing * prefixes, which is expected.
We should pass sources to the compiler without license headers, with
these changes the current flow will be:
1. Apply top-level definitions. For UMD-bundles, for example, or
DEV-only bundles (e. g. `if (__DEV__) { ...`)
2. Apply licence headers for artifacts with sourcemaps: oss-production
and oss-profiling bundles, they don't need to preserve the header format
to comply with Haste. We need to apply these headers before passing
sources to Closure, so it can build correct mappings for sourcemaps.
3. Pass these sources to closure compiler for minification and
sourcemaps building.
4. Apply licence headers for artifacts without sourcemaps: dev bundles,
fb bundles. This way the header style will be preserved and not changed
by Closure.
Upgrade Flow to latest using
```
yarn add -W flow-bin flow-remove-types hermes-parser hermes-eslint
```
This also updates `createFlowConfigs.js` to get the Flow version from
`package.json` to avoid needing to bump the version there in the future.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
The flag has been tested internally on WWW, should be good to set to
true for OSS. Added a dynamic flag for fb RN.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
yarn test
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
This PR updates the Rollup build pipeline to generate sourcemaps for
production build artifacts like `react-dom.production.min.js`.
It requires the Rollup v3 changes that were just merged in #26442 .
Sourcemaps are currently _only_ generated for build artifacts that are
_truly_ "production" - no sourcemaps will be generated for development,
profiling, UMD, or `shouldStayReadable` artifacts.
The generated sourcemaps contain the bundled source contents right
before that chunk was minified by Closure, and _not_ the original source
files like `react-reconciler/src/*`. This better reflects the actual
code that is running as part of the bundle, with all the feature flags
and transformations that were applied to the source files to generate
that bundle. The sourcemaps _do_ still show comments and original
function names, thus improving debuggability for production usage.
Fixes#20186 .
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
This allows React users to actually debug a readable version of the
React bundle in production scenarios. It also allows other tools like
[Replay](https://replay.io) to do a better job inspecting the React
source when stepping through.
## How did you test this change?
- Generated numerous sourcemaps with various combinations of the React
bundle selections
- Viewed those sourcemaps in
https://evanw.github.io/source-map-visualization/ and confirmed via the
visualization that the generated mappings appear to be correct
I've attached a set of production files + their sourcemaps here:
[react-sourcemap-examples.zip](https://github.com/facebook/react/files/11023466/react-sourcemap-examples.zip)
You can drag JS+sourcemap file pairs into
https://evanw.github.io/source-map-visualization/ for viewing.
Examples:
- `react.production.min.js`:
- `react-dom.production.min.js`:
- `use-sync-external-store/with-selector.production.min.js`:
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Adds a new option to `react-dom/server` entrypoints.
`onHeaders: (headers: Headers) => void` (non node envs)
`onHeaders: (headers: { Link?: string }) => void` (node envs)
When any `renderTo...` or `prerender...` function is called and this
option is provided the supplied function will be called sometime on or
before completion of the render with some preload link headers.
When provided during a `renderTo...` the callback will usually be called
after the first pass at work. The idea here is we want to get a set of
headers to start the browser loading well before the shell is ready. We
don't wait for the shell because if we did we may as well send the
preloads as tags in the HTML.
When provided during a `prerender...` the callback will be called after
the entire prerender is complete. The idea here is we are not responding
to a live request and it is preferable to capture as much as possible
for preloading as Headers in case the prerender was unable to finish the
shell.
Currently the following resources are always preloaded as headers when
the option is provided
1. prefetchDNS and preconnects
2. font preloads
3. high priority image preloads
Additionally if we are providing headers when the shell is incomplete
(regardless of whether it is render or prerender) we will also include
any stylesheet Resources (ones with a precedence prop)
There is a second option `maxHeadersLength?: number` which allows you to
specify the maximum length of the header content in unicode code units.
This is what you get when you read the length property of a string in
javascript. It's improtant to note that this is not the same as the
utf-8 byte length when these headers are serialized in a Response. The
utf8 representation may be the same size, or larger but it will never be
smaller.
If you do not supply a `maxHeadersLength` we defaul to `2000`. This was
chosen as half the value of the max headers length supported by commonly
known web servers and CDNs. many browser and web server can support
significantly more headers than this so you can use this option to
increase the headers limit. You can also of course use it to be even
more conservative. Again it is important to keep in mind there is no
direct translation between the max length and the bytelength and so if
you want to stay under a certain byte length you need to be potentially
more aggressive in the maxHeadersLength you choose.
Conceptually `onHeaders` could be called more than once as new headers
are discovered however if we haven't started flushing yet but since most
APIs for the server including the web standard Response only allow you
to set headers once the current implementation will only call it one
time
`Activity` is the current candidate name. This PR starts the rename work
by renaming the exported unstable component name.
NOTE: downstream consumers need to rename the import when updating to
this commit.
Support Flow `as` expressions in ESLint rules, e.g. `<expr> as <type>`.
This is the same syntax as TypeScript as expressions. I just looked for
any place referencing `TSAsExpression` (the TS node) or
`TypeCastExpression` (the previous Flow syntax) and added a case for
`AsExpression` as well.
Updates useFormState to allow a sync function to be passed as an action.
A form action is almost always async, because it needs to talk to the
server. But since we support client-side actions, too, there's no reason
we can't allow sync actions, too.
I originally chose not to allow them to keep the implementation simpler
but it's not really that much more complicated because we already
support this for actions passed to startTransition. So now it's
consistent: anywhere an action is accepted, a sync client function is a
valid input.
