* Remove object-assign polyfill
We really rely on a more modern environment where this is typically
polyfilled anyway and we don't officially support IE with more extensive
polyfilling anyway. So all environments should have the native version
by now.
* Use shared/assign instead of Object.assign in code
This is so that we have one cached local instance in the bundle.
Ideally we should have a compile do this for us but we already follow
this pattern with hasOwnProperty, isArray, Object.is etc.
* Transform Object.assign to now use shared/assign
We need this to use the shared instance when Object.spread is used.
Checks that if one React package depends on another, the current
version satisfies the given dependency range.
That way we don't forget to bump dependencies when we release a
new version.
This change adds a new "react-dom/unstable_testing" entry point but I believe its contents will exactly match "react-dom/index" for the stable build. (The experimental build will have the added new selector APIs.)
* Output FIXME during build for unminified errors
The invariant Babel transform used to output a FIXME comment if it
could not find a matching error code. This could happen if there were
a configuration mistake that caused an unminified message to
slip through.
Linting the compiled bundles is the most reliable way to do it because
there's not a one-to-one mapping between source modules and bundles. For
example, the same source module may appear in multiple bundles, some
which are minified and others which aren't.
This updates the transform to output the same messages for Error calls.
The source lint rule is still useful for catching mistakes during
development, to prompt you to update the error codes map before pushing
the PR to CI.
* Don't run error transform in development
We used to run the error transform in both production and development,
because in development it was used to convert `invariant` calls into
throw statements.
Now that don't use `invariant` anymore, we only have to run the
transform for production builds.
* Add ! to FIXME comment so Closure doesn't strip it
Don't love this solution because Closure could change this heuristic,
or we could switch to a differnt compiler that doesn't support it. But
it works.
Could add a bundle that contains an unminified error solely for the
purpose of testing it, but that seems like overkill.
* Alternate extract-errors that scrapes artifacts
The build script outputs a special FIXME comment when it fails to minify
an error message. CI will detect these comments and fail the workflow.
The comments also include the expected error message. So I added an
alternate extract-errors that scrapes unminified messages from the
build artifacts and updates `codes.json`.
This is nice because it works on partial builds. And you can also run it
after the fact, instead of needing build all over again.
* Disable error minification in more bundles
Not worth it because the number of errors does not outweight the size
of the formatProdErrorMessage runtime.
* Run extract-errors script in CI
The lint_build job already checks for unminified errors, but the output
isn't super helpful.
Instead I've added a new job that runs the extract-errors script and
fails the build if `codes.json` changes. It also outputs the expected
diff so you can easily see which messages were missing from the map.
* Replace old extract-errors script with new one
Deletes the old extract-errors in favor of extract-errors2
The `download-experimental-build` script has been flaky on CodeSandbox
CI, I think because of GitHub rate limiting.
Until we figure out how to fix that, I've updated it to fall back to a
local build.
* Remove reentrant check from Fizz/Flight
* Make startFlowing explicit in Flight
This is already an explicit call in Fizz. This moves flowing to be explicit.
That way we can avoid calling it in start() for web streams and therefore
avoid the reentrant call.
* Add regression test
This test doesn't actually error due to the streams polyfill not behaving
like Chrome but rather according to spec.
* Update the Web Streams polyfill
Not that we need this but just in case there are differences that are fixed.
Update all our local scripts to use `build` instead of `build2`.
There are still downstream scripts that depend on `build2`, though, so
we can't remove it yet.
* Track all suspended work while it's still pending
This allows us to abort work and put everything into client rendered mode
if we don't want to wait for further I/O.
It also allows us to cancel fallbacks if we complete the main content
before the fallback.
* Expose abort API to the browser streams
Since this API already returns a value, we need to use destructuring to
expose more options.
* Add a test including the client actually client rendering it
* Use AbortSignal option for W3C streams instead of external control
* Clean up listener after it's used once
```
yarn publish-prereleases
```
Script to trigger a CircleCI workflow that publishes preleases.
**The CI workflow doesn't actually publish yet; it just runs and logs
its inputs.**
DevTools was built with a fork of an early idea for how Suspense cache might work. This idea is incompatible with newer APIs like `useTransition` which unfortunately prevented me from making certain UX improvements. This PR swaps out the primary usage of this cache (there are a few) in favor of the newer `unstable_getCacheForType` and `unstable_useCacheRefresh` APIs. We can go back and update the others in follow up PRs.
### Messaging changes
I've refactored the way the frontend loads component props/state/etc to hopefully make it better match the Suspense+cache model. Doing this gave up some of the small optimizations I'd added but hopefully the actual performance impact of that is minor and the overall ergonomic improvements of working with the cache API make this worth it.
The backend no longer remembers inspected paths. Instead, the frontend sends them every time and the backend sends a response with those paths. I've also added a new "force" parameter that the frontend can use to tell the backend to send a response even if the component hasn't rendered since the last time it asked. (This is used to get data for newly inspected paths.)
_Initial inspection..._
```
front | | back
| -- "inspect" (id:1, paths:[], force:true) ---------> |
| <------------------------ "inspected" (full-data) -- |
```
_1 second passes with no updates..._
```
| -- "inspect" (id:1, paths:[], force:false) --------> |
| <------------------------ "inspected" (no-change) -- |
```
_User clicks to expand a path, aka hydrate..._
```
| -- "inspect" (id:1, paths:['foo'], force:true) ----> |
| <------------------------ "inspected" (full-data) -- |
```
_1 second passes during which there is an update..._
```
| -- "inspect" (id:1, paths:['foo'], force:false) ---> |
| <----------------- "inspectedElement" (full-data) -- |
```
### Clear errors/warnings transition
Previously this meant there would be a delay after clicking the "clear" button. The UX after this change is much improved.
### Hydrating paths transition
I also added a transition to hydration (expanding "dehyrated" paths).
### Better error boundaries
I also added a lower-level error boundary in case the new suspense operation ever failed. It provides a better "retry" mechanism (select a new element) so DevTools doesn't become entirely useful. Here I'm intentionally causing an error every time I select an element.
### Improved snapshot tests
I also migrated several of the existing snapshot tests to use inline snapshots and added a new serializer for dehydrated props. Inline snapshots are easier to verify and maintain and the new serializer means dehydrated props will be formatted in a way that makes sense rather than being empty (in external snapshots) or super verbose (default inline snapshot format).
The goal is to simplify our CI pipeline so that all configurations
are built and tested in a single workflow.
As a first step, this adds a new build script entry point that builds
both the experimental and stable release channels into a single
artifacts directory.
The script works by wrapping the existing build script (which only
builds a single release channel at a time), then post-processing the
results to match the desired filesystem layout. A future version of the
build script would output the files directly without post-processing.
Because many parts of our infra depend on the existing layout of the
build artifacts directory, I have left the old workflows untouched.
We can incremental migrate to the new layout, then delete the old
workflows after we've finished.
* Fixed invalid DevTools work tags
Work tags changed recently (PR #13902) but we didn't bump React versions. This meant that DevTools has valid work tags only for master (and FB www sync) but invalid work tags for the latest open source releases. To fix this, I incremneted React's version in Git (without an actual release) and added a new fork to the work tags detection branch.
This commit also adds tags for the experimental Scope and Fundamental APIs to DevTools so component names will at least display correctly. Technically these new APIs were first introduced to experimental builds ~16.9 but I didn't add a new branch to the work tags fork because I don't they're used commonly. I've just added them to the 17+ branches.
* Removed FundamentalComponent from DevTools tag defs
This lets the Flight fixture run as "type": "module" or "commonjs".
Experimental loaders can be used similar to require.extensions to do the
transpilation and replacement of .client.js references.
* bump package to latest
* update files to respect lint
* disable object-type-delimiter rule to work with prettier
* disable rule to let flow check pass
* Deprecate old test script commands
* Update PR template test script
* Add test-stable and test-www-classic
* Update circle test names
* Rename test-www-classic to test-classic
* Missed some job renames
* Missed some more job renames
* Add babel parser which supports ChainExpression
* Add and fix tests for new babel eslint parser
* extract function to mark node
* refactor for compatibility with eslint v7.7.0+
* Update eslint to v7.7.0
Update hook test since eslint now supports nullish coalescing
* Add new test cli
* Remove --variant accidentally added to test-persist
* s/test/tests
* Updates from review
* Update package.json tests
* Missed a release channel in circle.yaml
* Update config.yml to use just run: with test commands
* Update release-channel options and add build dir checks
* Update test args to use the new release-channel options
* Fix error in circle config.yml
* Fix a wrong condition for the --variant check
* Fix a wrong condition for the --persistent check
* Prettier
* Require build check for devtool tests as well
* Add autofix to cross-fork lint rule
* replace-fork: Replaces old fork contents with new
For each file in the new fork, copies the contents into the
corresponding file of the old fork, replacing what was already there.
In contrast to merge-fork, which performs a three-way merge.
* Replace old fork contents with new fork
First I ran `yarn replace-fork`.
Then I ran `yarn lint` with autofix enabled. There's currently no way to
do that from the command line (we should fix that), so I had to edit the
lint script file.
* Manual fix-ups
Removes dead branches, removes prefixes from internal fields. Stuff
like that.
* Fix DevTools tests
DevTools tests only run against the old fork, which is why I didn't
catch these earlier.
There is one test that is still failing. I'm fairly certain it's related
to the layout of the Suspense fiber: we no longer conditionally wrap the
primary children. They are always wrapped in an extra fiber.
Since this has been running in www for weeks without major issues, I'll
defer fixing the remaining test to a follow up.
* Upgrade fbjs-scripts
This script takes into account the NODE_ENV as part of jest cache keys.
This avoids flaky tests since we depend on different transforms in prod
and dev.
* Upgrade Fresh test to Babel 7 transform
I made a mistake when setting these up a while ago. Setting the NODE_ENV
in the CircleCI config doesn't work because it's also set in the node
script command.
The number of test commands is getting out of control. Might need to fix
it at some point. Not today for me.
Adds command `yarn merge-fork`.
```sh
yarn merge-fork --base-dir=packages/react-reconciler/src ReactFiberWorkLoop
```
This will take all the changes in `ReactFiberWorkLoop.new.js` and apply
them to `ReactFiberWorkLoop.old.js`.
You can merge multiple modules at a time:
```sh
yarn merge-fork \
--base-dir=packages/react-reconciler/src \
ReactFiberWorkLoop \
ReactFiberBeginWork \
ReactFiberCompleteWork \
ReactFiberCommitWork
```
You can provide explicit "old" and "new" file names. This only works
for one module at a time:
```sh
yarn merge-fork \
--base-dir=packages/react-reconciler/src \
--old=ReactFiberExpirationTime.js \
--new=ReactFiberLane.js
```
The default is to merge changes from the new module to the old one. To
merge changes in the opposite direction, use `--reverse`.
```sh
yarn merge-fork \
--reverse \
--base-dir=packages/react-reconciler/src \
ReactFiberWorkLoop
```
By default, the changes are compared to HEAD. You can use `--base-ref`
to compare to any rev. For example, while working on a PR, you might
make multiple commits to the new fork before you're ready to backport
them to the old one. In that case, you want to compare to the merge
base of your PR branch:
```sh
yarn merge-fork \
--base-ref=$(git merge-base HEAD origin/master)
--base-dir=packages/react-reconciler/src \
ReactFiberWorkLoop
```
