<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
This PR updates the Rollup build pipeline to generate sourcemaps for
production build artifacts like `react-dom.production.min.js`.
It requires the Rollup v3 changes that were just merged in #26442 .
Sourcemaps are currently _only_ generated for build artifacts that are
_truly_ "production" - no sourcemaps will be generated for development,
profiling, UMD, or `shouldStayReadable` artifacts.
The generated sourcemaps contain the bundled source contents right
before that chunk was minified by Closure, and _not_ the original source
files like `react-reconciler/src/*`. This better reflects the actual
code that is running as part of the bundle, with all the feature flags
and transformations that were applied to the source files to generate
that bundle. The sourcemaps _do_ still show comments and original
function names, thus improving debuggability for production usage.
Fixes#20186 .
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
This allows React users to actually debug a readable version of the
React bundle in production scenarios. It also allows other tools like
[Replay](https://replay.io) to do a better job inspecting the React
source when stepping through.
## How did you test this change?
- Generated numerous sourcemaps with various combinations of the React
bundle selections
- Viewed those sourcemaps in
https://evanw.github.io/source-map-visualization/ and confirmed via the
visualization that the generated mappings appear to be correct
I've attached a set of production files + their sourcemaps here:
[react-sourcemap-examples.zip](https://github.com/facebook/react/files/11023466/react-sourcemap-examples.zip)
You can drag JS+sourcemap file pairs into
https://evanw.github.io/source-map-visualization/ for viewing.
Examples:
- `react.production.min.js`:
- `react-dom.production.min.js`:
- `use-sync-external-store/with-selector.production.min.js`:
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Search for more generic fork files if an exact match does not exist. If
`forks/MyFile.dom.js` exists but `forks/MyFile.dom-node.js` does not
then use it when trying to resolve forks for the `"dom-node"` renderer
in flow, tests, and build
consolidate certain fork files that were identical and make semantic
sense to be generalized
add `dom-browser-esm` bundle and use it for
`react-server-dom-esm/client.browser` build
Follow-up to https://github.com/facebook/react/pull/26442.
It looks like we missed a few cases where we default import a CommonJS
module, which leads to Rollup adding `.default` access, e.g.
`require('webpack/lib/Template').default` in the output.
To fix, add the remaining cases to the list of exceptions. Verified by
going through all `externals` in the bundle list, and manually checking
the webpack plugin.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
This PR:
- Updates Rollup from 2.x to latest 3.x, and updates associated plugins
- Updates deprecated / altered config settings in the Rollup plugin
pipeline
- Fixes some file extension and import issues related to use of ESM in
`react-dom-webpack-server`
- Removes a now-obsolete `strip-unused-imports` Rollup plugin
- <s>Fixes an _existing_ bug with the Rollup 2.x plugin pipeline on
`main` that was causing parts of `DOMProperty.js` to get left out of the
`react-dom-webpack-server` JS bundles, by adding a new plugin to tell
Rollup to treat that file as if it as side effects</s>
This PR should be functionally identical to the other existing "Rollup 3
upgrade" PR at #26078 . I'm filing this as a near-duplicate because I'm
ready to push this change through ASAP so that I can follow it up with a
PR that adds sourcemap support, that PR's artifact diffing seems like
it's possibly stuck and I want to compare the build results, and I've
got this set up against latest `main`.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
This gets React's build setup updated to the latest Rollup version,
which is generally a good practice, but also ensures that any further
Rollup config tweaks can be done using the current Rollup docs as a
reference.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
- Made builds from the latest `main`
- Updated Rollup package versions and cross-compared the changes I
needed to make locally to get successful builds vs #26078
- Diffed the output folders between `main` and this PR, and confirmed
that the bundle contents are identical (with the exception of version
strings and the `react-dom-webpack-server` bundle fix re-adding missing
`DOMProperty.js` content)
This splits out the Edge and Node implementations of Flight Client into
their own implementations. The Node implementation now takes a Node
Stream as input.
I removed the bundler config from the Browser variant because you're
never supposed to use that in the browser since it's only for SSR.
Similarly, it's required on the server. This also enables generating a
SSR manifest from the Webpack plugin. This is necessary for SSR so that
you can reverse look up what a client module is called on the server.
I also removed the option to pass a callServer from the server. We might
want to add it back in the future but basically, we don't recommend
calling Server Functions from render for initial render because if that
happened client-side it would be a client-side waterfall. If it's never
called in initial render, then it also shouldn't ever happen during SSR.
This might be considered too restrictive.
~This also compiles the unbundled packages as ESM. This isn't strictly
necessary because we only need access to dynamic import to load the
modules but we don't have any other build options that leave
`import(...)` intact, and seems appropriate that this would also be an
ESM module.~ Went with `import(...)` in CJS instead.
## Summary
In rollup v1.19.4, The "treeshake.pureExternalModules" option is
deprecated. The "treeshake.moduleSideEffects" option should be used
instead, see
https://github.com/rollup/rollup/blob/v1.19.4/src/Graph.ts#L130.
## How did you test this change?
ci green
This is the first of a series of PRs, that let you pass functions, by
reference, to the client and back. E.g. through Server Context. It's
like client references but they're opaque on the client and resolved on
the server.
To do this, for security, you must opt-in to exposing these functions to
the client using the `"use server"` directive. The `"use client"`
directive lets you enter the client from the server. The `"use server"`
directive lets you enter the server from the client.
This works by tagging those functions as Server References. We could
potentially expand this to other non-serializable or stateful objects
too like classes.
This only implements server->server CJS imports and server->server ESM
imports. We really should add a loader to the webpack plug-in for
client->server imports too. I'll leave closures as an exercise for
integrators.
You can't "call" a client reference on the server, however, you can
"call" a server reference on the client. This invokes a callback on the
Flight client options called `callServer`. This lets a router implement
calling back to the server. Effectively creating an RPC. This is using
JSON for serializing those arguments but more utils coming from
client->server serialization.
The old version of prettier we were using didn't support the Flow syntax
to access properties in a type using `SomeType['prop']`. This updates
`prettier` and `rollup-plugin-prettier` to the latest versions.
I added the prettier config `arrowParens: "avoid"` to reduce the diff
size as the default has changed in Prettier 2.0. The largest amount of
changes comes from function expressions now having a space. This doesn't
have an option to preserve the old behavior, so we have to update this.
## Summary
Updating import for babel-code-frame to use the official @babel package,
as babel-code-frame is a ghost dependency. This change is necessary to
avoid potential issues and stay up-to-date with the latest version of
@babel/code-frame, which is already declared in our project's
package.json.
## How did you test this change?
yarn test
Flow introduced a new syntax to annotated the context type of a
function, this tries to update the rest and add 1 example usage.
- 2b1fb91a55 already added the changes
required for eslint.
- Jest transform is updated to use the recommended `hermes-parser` which
can parse current and Flow syntax and will be updated in the future.
- Rollup uses a new plugin to strip the flow types. This isn't ideal as
the npm module is deprecated in favor of using `hermes-parser`, but I
couldn't figure out how to integrate that with Rollup.
We've heard from multiple contributors that the Reconciler forking
mechanism was confusing and/or annoying to deal with. Since it's
currently unused and there's no immediate plans to start using it again,
this removes the forking.
Fully removing the fork is split into 2 steps to preserve file history:
**This PR**
- remove `enableNewReconciler` feature flag.
- remove `unstable_isNewReconciler` export
- remove eslint rules for cross fork imports
- remove `*.new.js` files and update imports
- merge non-suffixed files into `*.old` files where both exist
(sometimes types were defined there)
**#25775**
- rename `*.old` files
* Scaffolding for react-dom/unstable_external-server-runtime
Implements a new bundle type for in our build config called
BROWSER_SCRIPT. This is intended for scripts that get delivered straight
to the browser without needing to be processed by a bundler. (And also
doesn't include any extra UMD crap.)
Right now there's only a single use case so I didn't stress about making
it general purpose.
The use case is: a script that loads the Fizz browser runtime, and sets
up a MutationObserver to receive instructions as HTML streams in. This
will be an alternative option to the default Fizz behavior of sending
the runtime down as inline script tags, to accommodate environments
where inline script tags are not allowed.
There's no development version of this bundle because it doesn't contain
any warnings or run any user code.
None of the actual implementation is in this PR; it just sets up the
build infra.
Co-authored-by: Mofei Zhang <feifei0@fb.com>
* Set BUNDLE_SCRIPT's GCC output format to ES5
This removes the automatic 'use strict' directive, which we don't need.
Co-authored-by: Mofei Zhang <feifei0@fb.com>
Fix matching in the build script.
It's possible to provide a custom bundle name in the case we build deep
imports. We should match those names as a convenience.
The script also calls toLowerCase on requested names but some entries have
upper case now.
* Remove object-assign polyfill
We really rely on a more modern environment where this is typically
polyfilled anyway and we don't officially support IE with more extensive
polyfilling anyway. So all environments should have the native version
by now.
* Use shared/assign instead of Object.assign in code
This is so that we have one cached local instance in the bundle.
Ideally we should have a compile do this for us but we already follow
this pattern with hasOwnProperty, isArray, Object.is etc.
* Transform Object.assign to now use shared/assign
We need this to use the shared instance when Object.spread is used.
* Output FIXME during build for unminified errors
The invariant Babel transform used to output a FIXME comment if it
could not find a matching error code. This could happen if there were
a configuration mistake that caused an unminified message to
slip through.
Linting the compiled bundles is the most reliable way to do it because
there's not a one-to-one mapping between source modules and bundles. For
example, the same source module may appear in multiple bundles, some
which are minified and others which aren't.
This updates the transform to output the same messages for Error calls.
The source lint rule is still useful for catching mistakes during
development, to prompt you to update the error codes map before pushing
the PR to CI.
* Don't run error transform in development
We used to run the error transform in both production and development,
because in development it was used to convert `invariant` calls into
throw statements.
Now that don't use `invariant` anymore, we only have to run the
transform for production builds.
* Add ! to FIXME comment so Closure doesn't strip it
Don't love this solution because Closure could change this heuristic,
or we could switch to a differnt compiler that doesn't support it. But
it works.
Could add a bundle that contains an unminified error solely for the
purpose of testing it, but that seems like overkill.
* Alternate extract-errors that scrapes artifacts
The build script outputs a special FIXME comment when it fails to minify
an error message. CI will detect these comments and fail the workflow.
The comments also include the expected error message. So I added an
alternate extract-errors that scrapes unminified messages from the
build artifacts and updates `codes.json`.
This is nice because it works on partial builds. And you can also run it
after the fact, instead of needing build all over again.
* Disable error minification in more bundles
Not worth it because the number of errors does not outweight the size
of the formatProdErrorMessage runtime.
* Run extract-errors script in CI
The lint_build job already checks for unminified errors, but the output
isn't super helpful.
Instead I've added a new job that runs the extract-errors script and
fails the build if `codes.json` changes. It also outputs the expected
diff so you can easily see which messages were missing from the map.
* Replace old extract-errors script with new one
Deletes the old extract-errors in favor of extract-errors2
This commit adds code to all React bundles to explicitly register the beginning and ending of the module. This is done by creating Error objects (which capture the file name, line number, and column number) and passing them explicitly to a DevTools hook (when present).
Next, as the Scheduling Profiler logs metadata to the User Timing API, it prints these module ranges along with other metadata (like Lane values and profiler version number).
Lastly, the Scheduling Profiler UI compares stack frames to these ranges when drawing the flame graph and dims or de-emphasizes frames that fall within an internal module.
The net effect of this is that user code (and 3rd party code) stands out clearly in the flame graph while React internal modules are dimmed.
Internal module ranges are completely optional. Older profiling samples, or ones recorded without the React DevTools extension installed, will simply not dim the internal frames.
* Hoist error codes import to module scope
When this code was written, the error codes map (`codes.json`) was
created on-the-fly, so we had to lazily require from inside the visitor.
Because `codes.json` is now checked into source, we can import it a
single time in module scope.
* Minify error constructors in production
We use a script to minify our error messages in production. Each message
is assigned an error code, defined in `scripts/error-codes/codes.json`.
Then our build script replaces the messages with a link to our
error decoder page, e.g. https://reactjs.org/docs/error-decoder.html/?invariant=92
This enables us to write helpful error messages without increasing the
bundle size.
Right now, the script only works for `invariant` calls. It does not work
if you throw an Error object. This is an old Facebookism that we don't
really need, other than the fact that our error minification script
relies on it.
So, I've updated the script to minify error constructors, too:
Input:
Error(`A ${adj} message that contains ${noun}`);
Output:
Error(formatProdErrorMessage(ERR_CODE, adj, noun));
It only works for constructors that are literally named Error, though we
could add support for other names, too.
As a next step, I will add a lint rule to enforce that errors written
this way must have a corresponding error code.
* Minify "no fallback UI specified" error in prod
This error message wasn't being minified because it doesn't use
invariant. The reason it didn't use invariant is because this particular
error is created without begin thrown — it doesn't need to be thrown
because it's located inside the error handling part of the runtime.
Now that the error minification script supports Error constructors, we
can minify it by assigning it a production error code in
`scripts/error-codes/codes.json`.
To support the use of Error constructors more generally, I will add a
lint rule that enforces each message has a corresponding error code.
* Lint rule to detect unminified errors
Adds a lint rule that detects when an Error constructor is used without
a corresponding production error code.
We already have this for `invariant`, but not for regular errors, i.e.
`throw new Error(msg)`. There's also nothing that enforces the use of
`invariant` besides convention.
There are some packages where we don't care to minify errors. These are
packages that run in environments where bundle size is not a concern,
like react-pg. I added an override in the ESLint config to ignore these.
* Temporarily add invariant codemod script
I'm adding this codemod to the repo temporarily, but I'll revert it
in the same PR. That way we don't have to check it in but it's still
accessible (via the PR) if we need it later.
* [Automated] Codemod invariant -> Error
This commit contains only automated changes:
npx jscodeshift -t scripts/codemod-invariant.js packages --ignore-pattern="node_modules/**/*"
yarn linc --fix
yarn prettier
I will do any manual touch ups in separate commits so they're easier
to review.
* Remove temporary codemod script
This reverts the codemod script and ESLint config I added temporarily
in order to perform the invariant codemod.
* Manual touch ups
A few manual changes I made after the codemod ran.
* Enable error code transform per package
Currently we're not consistent about which packages should have their
errors minified in production and which ones should.
This adds a field to the bundle configuration to control whether to
apply the transform. We should decide what the criteria is going
forward. I think it's probably a good idea to minify any package that
gets sent over the network. So yes to modules that run in the browser,
and no to modules that run on the server and during development only.
This allows exporting ESM modules for the Webpack plugin. This is necessary
for making a resolver plugin. We could probably make the whole plugin
use ESM instead of CJS ES2015.
* Lint bundles using the bundle config instead of scanning for files
This ensures that we look for all the files that we expect to see there.
If something doesn't get built we wouldn't detect it.
However, this doesn't find files that aren't part of our builds such as
indirection files in the root. This will need to change with ESM anyway
since indirection files doesn't work. Everything should be built anyway.
This ensures that we can use the bundles.js config to determine special
cases instead of relying on file system conventions.
* Run lint with flag
* First pass at scaffolding out the Node implementation of react-data.
While incomplete, this patch contains some changes to the react-data
package in order to start adding support for Node.
The first part of this change accounts for splitting react-data/fetch
into two discrete entries, adding (and defaulting to) the Node
implementation.
The second part is sketching out a rough approximation of `fetch` for
Node. This implementation is not complete by any means, but provides a
starting point.
* Remove NodeFetch module and put it directly into ReactDataFetchNode.
* Replaced react-data with react-fetch.
This patch shuffles around some of the scaffolding that was in
react-data in favor of react-fetch. It also removes the additional
"fetch" package in favor of something flatter.
* Tweak package organization
* Simplify and add a test
Co-authored-by: Dan Abramov <dan.abramov@me.com>
* Remove /dist/ UMD builds
We publish UMDs to npm (and we're considering stopping even that).
This means we'll stop publishing to http://react.zpao.com/builds/master/latest/
* Update fixture paths
* Upgrade Closure
There are newer versions but they don't yet have corresponding releases
of google-closure-compiler-osx.
* Configure build
* Refactor ReactSymbols a bit
Provides a little better output.
* ReactFiberReconciler -> ReactFiberReconciler.old
* Set up infra for react-reconciler fork
We're planning to land some significant refactors of the reconciler.
We want to be able to gradually roll out the new implementation side-by-
side with the existing one. So we'll create a short lived fork of the
react-reconciler package. Once the new implementation has stabilized,
we'll delete the old implementation and promote the new one.
This means, for as long as the fork exists, we'll need to maintain two
separate implementations. This sounds painful, but since the forks will
still be largely the same, most changes will not require two separate
implementations. In practice, you'll implement the change in the old
fork and then copy paste it to the new one.
This commit only sets up the build and testing infrastructure. It does
not actually fork any modules. I'll do that in subsequent PRs.
The forked version of the reconciler will be used to build a special
version of React DOM. I've called this build ReactDOMForked. It's only
built for www; there's no open source version.
The new reconciler is disabled by default. It's enabled in the
`yarn test-www-variant` command. The reconciler fork isn't really
related to the "variant" feature of the www builds, but I'm piggy
backing on that concept to avoid having to add yet another
testing dimension.
In CI, we run our test suite against multiple build configurations. For
example, we run our tests in both dev and prod, and in both the
experimental and stable release channels. This is to prevent accidental
deviations in behavior between the different builds. If there's an
intentional deviation in behavior, the test author must account
for them.
However, we currently don't run tests against the www builds. That's
a problem, because it's common for features to land in www before they
land anywhere else, including the experimental release channel.
Typically we do this so we can gradually roll out the feature behind
a flag before deciding to enable it.
The way we test those features today is by mutating the
`shared/ReactFeatureFlags` module. There are a few downsides to this
approach, though. The flag is only overridden for the specific tests or
test suites where you apply the override. But usually what you want is
to run *all* tests with the flag enabled, to protect against unexpected
regressions.
Also, mutating the feature flags module only works when running the
tests against source, not against the final build artifacts, because the
ReactFeatureFlags module is inlined by the build script.
Instead, we should run the test suite against the www configuration,
just like we do for prod, experimental, and so on. I've added a new
command, `yarn test-www`. It automatically runs in CI.
Some of the www feature flags are dynamic; that is, they depend on
a runtime condition (i.e. a GK). These flags are imported from an
external module that lives in www. Those flags will be enabled for some
clients and disabled for others, so we should run the tests against
*both* modes.
So I've added a new global `__VARIANT__`, and a new test command `yarn
test-www-variant`. `__VARIANT__` is set to false by default; when
running `test-www-variant`, it's set to true.
If we were going for *really* comprehensive coverage, we would run the
tests against every possible configuration of feature flags: 2 ^
numberOfFlags total combinations. That's not practical, though, so
instead we only run against two combinations: once with `__VARIANT__`
set to `true`, and once with it set to `false`. We generally assume that
flags can be toggled independently, so in practice this should
be enough.
You can also refer to `__VARIANT__` in tests to detect which mode you're
running in. Or, you can import `shared/ReactFeatureFlags` and read the
specific flag you can about. However, we should stop mutating that
module going forward. Treat it as read-only.
In this commit, I have only setup the www tests to run against source.
I'll leave running against build for a follow up.
Many of our tests currently assume they run only in the default
configuration, and break when certain flags are toggled. Rather than fix
these all up front, I've hard-coded the relevant flags to the default
values. We can incrementally migrate those tests later.
* Only use Rollup's CommonJS plugin for "react-art"
We still need it for the "art" UMD builds but nothing else should have
CommonJS dependencies anymore.
* react-debug-tools and jest-react should leave object-assign as an external dep
This avoids it being compiled into the output.
* Add options for forked entry points
We currently fork .fb.js entry points. This adds a few more options.
.modern.fb.js - experimental FB builds
.classic.fb.js - stable FB builds
.fb.js - if no other FB build, use this for FB builds
.experimental.js - experimental builds
.stable.js - stable builds
.js - used if no other override exists
This will be used to have different ES exports for different builds.
* Switch React to named exports
* Export named exports from the export point itself
We need to re-export the Flow exported types so we can use them in our code.
We don't want to use the Flow types from upstream since it doesn't have the non-public APIs that we have.
This should be able to use export * but I don't know why it doesn't work.
This actually enables Flow typing of React which was just "any" before.
This exposed some Flow errors that needs fixing.
* Create forks for the react entrypoint
None of our builds expose all exports and they all differ in at least one
way, so we need four forks.
* Set esModule flag to false
We don't want to emit the esModule compatibility flag on our CommonJS
output. For now we treat our named exports as if they're CommonJS.
This is a potentially breaking change for scheduler (but all those apis
are unstable), react-is and use-subscription. However, it seems unlikely
that anyone would rely on this since these only have named exports.
* Remove unused Feature Flags
* Let jest observe the stable fork for stable tests
This lets it do the negative test by ensuring that the right tests fail.
However, this in turn will make other tests that are not behind
__EXPERIMENTAL__ fail. So I need to do that next.
* Put all tests that depend on exports behind __EXPERIMENTAL__
Since there's no way to override the exports using feature flags
in .intern.js anymore we can't use these APIs in stable.
The tradeoff here is that we can either enable the negative tests on
"stable" that means experimental are expected to fail, or we can disable
tests on stable. This is unfortunate since some of these APIs now run on
a "stable" config at FB instead of the experimental.
* Switch ReactDOM to named exports
Same strategy as React.
I moved the ReactDOMFB runtime injection to classic.fb.js
Since we only fork the entrypoint, the `/testing` entrypoint needs to
be forked too to re-export the same things plus `act`. This is a bit
unfortunate. If it becomes a pattern we can consider forking in the
module resolution deeply.
fix flow
* Fix ReactDOM Flow Types
Now that ReactDOM is Flow type checked we need to fix up its types.
* Configure jest to use stable entry for ReactDOM in non-experimental
* Remove additional FeatureFlags that are no longer needed
These are only flagging the exports and no implementation details so we
can control them fully through the export overrides.
* Build both stable and experimental WWW builds
* Flip already experimental WWW flags to true
* Remove FB-specific internals from modern FB builds
We think we're not going to need these.
* Disable classic features in modern WWW builds
* Disable legacy ReactDOM API for modern WWW build
* Don’t include user timing in prod
* Fix bad copy paste and add missing flags to test renderer
* Add testing WWW feature flag file
We need it because WWW has a different meaning of experimental now.
* Replace all warning/lowPriWarning with console calls
* Replace console.warn/error with a custom wrapper at build time
* Fail the build for console.error/warn() where we can't read the stack
* prep for codemod
* prep warnings
* rename lint rules
* codemod for ifs
* shim www functions
* Handle more cases in the transform
* Thanks De Morgan
* Run the codemod
* Delete the transform
* Fix up confusing conditions manually
* Fix up www shims to match expected API
* Also check for low-pri warning in the lint rule
* Replace Babel plugin with an ESLint plugin
* Fix ESLint rule violations
* Move shared conditions higher
* Test formatting nits
* Tweak ESLint rule
* Bugfix: inside else branch, 'if' tests are not satisfactory
* Use a stricter check for exactly if (__DEV__)
This makes it easier to see what's going on and matches dominant style in the codebase.
* Fix remaining files after stricter check
`yarn build` defaults to building in experimental mode. To opt-out, set
the `RELEASE_CHANNEL` environment variable to `stable`. This is the same
as what we do when running tests via `yarn test`, to make local
development easier.
* Don't bother including `unstable_` in error
The method names don't get stripped out of the production bundles
because they are passed as arguments to the error decoder.
Let's just always use the unprefixed APIs in the messages.
* Set up experimental builds
The experimental builds are packaged exactly like builds in the stable
release channel: same file structure, entry points, and npm package
names. The goal is to match what will eventually be released in stable
as closely as possible, but with additional features turned on.
Versioning and Releasing
------------------------
The experimental builds will be published to the same registry and
package names as the stable ones. However, they will be versioned using
a separate scheme. Instead of semver versions, experimental releases
will receive arbitrary version strings based on their content hashes.
The motivation is to thwart attempts to use a version range to match
against future experimental releases. The only way to install or depend
on an experimental release is to refer to the specific version number.
Building
--------
I did not use the existing feature flag infra to configure the
experimental builds. The reason is because feature flags are designed
to configure a single package. They're not designed to generate multiple
forks of the same package; for each set of feature flags, you must
create a separate package configuration.
Instead, I've added a new build dimension called the **release
channel**. By default, builds use the **stable** channel. There's
also an **experimental** release channel. We have the option to add more
in the future.
There are now two dimensions per artifact: build type (production,
development, or profiling), and release channel (stable or
experimental). These are separate dimensions because they are
combinatorial: there are stable and experimental production builds,
stable and experimental developmenet builds, and so on.
You can add something to an experimental build by gating on
`__EXPERIMENTAL__`, similar to how we use `__DEV__`. Anything inside
these branches will be excluded from the stable builds.
This gives us a low effort way to add experimental behavior in any
package without setting up feature flags or configuring a new package.
The previous naming scheme used the name of the resulting bundle file.
However, there are cases where multiple bundles have the same filename.
This meant whichever bundle finishes last overwrites the previous ones
with the same name.
The updated naming scheme is `bundle-sizes-<CI_NODE_INDEX>.json`.
Instead of generating a separate info file per bundle, it now creates
one per process.
