Stacked on #34101.
This adds a badge to owners if they are different from the currently
selected component's environment.
<img width="590" height="566" alt="Screenshot 2025-08-04 at 5 15 02 PM"
src="https://github.com/user-attachments/assets/e898254f-1b4c-498e-8713-978d90545340"
/>
We also add one to the end of stack traces if the stack trace has a
different environment than the owner which can happen when you call a
function (without rendering a component) into a third party environment
but the owner component was in the first party.
One awkward thing is that Suspense boundaries are always in the client
environment so their Server Components are always badged.
If there is a commit that removes the currently inspected (selected)
elements in the Components tree, we are going to kick off the transition
to re-render the Tree. The elements will be re-rendered with the
previous inspectedElementID, which was just removed and all consecutive
calls to store object with this id would produce errors, since this
element was just removed.
We should handle store mutations synchronously. Doesn't make sense to
start a transition in this case, because Elements depend on the
TreeState and could make calls to store in render function.
Before:
<img width="2286" height="1734" alt="Screenshot 2025-08-06 at 17 41 14"
src="https://github.com/user-attachments/assets/97d92220-3488-47b2-aa6b-70fa39345f6b"
/>
After:
https://github.com/user-attachments/assets/3da36aff-6987-4b76-b741-ca59f829f8e6
Stacked on #34089.
This measures the client rects of the direct children of Suspense
boundaries as we reconcile. This will be used by the Suspense tab to
visualize the boundaries given their outlines.
We could ask for this more lazily just in case we're currently looking
at the Suspense tab. We could also do something like monitor the sizes
using a ResizeObserver to cover when they change.
However, it should be pretty cheap to this in the reconciliation phase
since we're already mostly visiting these nodes on the way down. We have
also already done all the layouts at this point since it was part of the
commit phase and paint already. So we're just reading cached values in
this phase. We can also infer that things are expected to change when
parents or sibling changes. Similar technique as ViewTransitions.
Stacked on #34093.
Instead of using the original `ReactStackTrace` that has the call sites
on the server, this parses the `Error` object which has the virtual call
sites on the client. We'll need this technique for things stack traces
suspending on the client anyway like `use()`.
We can then use these callsites to source map in the front end.
We currently don't source map function names but might be useful for
this use case as well as getting original component names from prod.
One thing this doesn't do yet is that it doesn't ignore list the stack
traces on the client using the source map's ignore list setting. It's
not super important since we expect to have already ignore listed on the
server but this will become important for client stack traces like
`use()`.
or end time if they have the same start time.
<img width="517" height="411" alt="Screenshot 2025-08-04 at 4 00 23 PM"
src="https://github.com/user-attachments/assets/b99be67b-5727-4e24-98c0-ee064fb21e2f"
/>
They would typically appear in this order naturally but not always.
Especially in Suspense boundaries where the order can also be depended
on when the components are discovered.
Stacked on #34094.
This shows the I/O stack if available. If it's not available or if it
has a different owner (like if it was passed in) then we show the
`"awaited at:"` stack below it so you can see where it started and where
it was awaited. If it's the same owner this tends to be unnecessary
noise. We could maybe be smarter if the stacks are very different then
you might want to show both even with the same owner.
<img width="517" height="478" alt="Screenshot 2025-08-04 at 11 57 28 AM"
src="https://github.com/user-attachments/assets/2dbfbed4-4671-4a5f-8e6e-ebec6fe8a1b7"
/>
Additionally, this adds an inferred await if there's no owner and no
stack for the await. The inferred await of a function/class component is
just the owner. No stack. Because the stack trace would be the return
value. This will also be the case if you use throw-a-Promise. The
inferred await in the child position of a built-in is the JSX location
of that await like if you pass a promise to a child. This inference
already happens when you pass a Promise from RSC so in this case it
already has an await - so this is mainly for client promises.
Stacked on #34082.
This keeps the DevToolsInstance children alive inside Offscreen trees
while they're hidden. However, they're sent as unmounted to the front
end store.
This allows DevTools state to be preserved between these two states.
Such as it keeps the "suspended by" set on the SuspenseNode alive since
the children are still mounted. So now you when you resuspend, you can
see what in the children was suspended. This is useful when you're
simulating a suspense but can also be a bit misleading when something
suspended for real since it'll only show the previous suspended set and
not what is currently suspending it since that hasn't committed yet.
SuspenseNodes inside resuspended trees are now kept alive too. That way
they can contribute to the timeline even when resuspended. We can choose
whether to keep them visible in the rects while hidden or not.
In the future we'll also need to add more special cases around Activity.
Because right now if SuspenseNodes are kept alive in the Suspense tab UI
while hidden, then they're also alive inside Activity that are hidden
which maybe we don't want. Maybe simplest would be that they both
disappear from the Suspense tab UI but can be considered for the
timeline.
Another case is that when Activity goes hidden, Fiber will no longer
cause its content to suspend the parent but that's not modeled here. So
hidden Activity will show up as "suspended by" in a parent Suspense.
When they disconnect, they should really be removed from the "suspended
by" set of the parent (and perhaps be shown only on the Activity
boundary itself).
This searches through the remaining children to see if any of them were
children of the bailed out FiberInstance and if so we should reuse them
in the new set. It's faster to do this than search through children of
the FiberInstance for Suspense boundaries.
Show the value as "fulfilled: Type" or "rejected: Type" immediately
instead of having to expand it twice. We could show all the properties
of the object immediately like we do in the Performance Track but it's
not always particularly interesting data in the value that isn't already
in the header.
I also moved it to the end after the stack traces since I think the
stack is more interesting but I'm also visually trying to connect the
stack trace with the "name" since typically the "name" will come from
part of the stack trace.
Before:
<img width="517" height="433" alt="Screenshot 2025-08-03 at 11 39 49 PM"
src="https://github.com/user-attachments/assets/ad28d8a2-c149-4957-a393-20ff3932a819"
/>
After:
<img width="520" height="476" alt="Screenshot 2025-08-03 at 11 58 35 PM"
src="https://github.com/user-attachments/assets/53a755b0-bb68-4305-9d16-d6fac7ca4910"
/>
We'll need complete parsing of stack traces for both owner stacks and
async debug info so we need to expand the stack parsing capabilities a
bit. This refactors the source location extraction to use some helpers
we can use for other things too.
This is a fork of `ReactFlightStackConfigV8` which also supports
DevTools requirements like checking both `react_stack_bottom_frame` and
`react-stack-bottom-frame` as well as supporting Firefox stacks.
It also supports extracting the first frame of a component stack or the
last frame of an owner stack for the source location.
We have two type of links that appear next to each other now. One type
of link jumps to a Component instance in the DevTools. The other opens a
source location - e.g. in your editor.
This clarifies that something will jump to the Component instance by
marking it as bold and using angle brackets around the name.
This can be seen in the "rendered by" list of owner as well as in the
async stack traces when the stack was in a different owner than the one
currently selected.
<img width="516" height="387" alt="Screenshot 2025-08-03 at 11 27 38 PM"
src="https://github.com/user-attachments/assets/5da50262-1e74-4e46-a6f8-96b4c1e4db31"
/>
The idea is to connect this styling to the owner stacks using
`createTask` where this same pattern occurs (albeit the task name is not
clickable):
<img width="454" height="188" alt="Screenshot 2025-08-03 at 11 23 45 PM"
src="https://github.com/user-attachments/assets/81a55c8f-963a-4fda-846a-97f49ef0c469"
/>
In fact, I was going to add the stack traces to the "rendered by" list
to give the ability to jump to the JSX location in the owner stack so
that it becomes this same view.
This has been bothering me. You can click the arrow and the value to
expand/collapse a KeyValue row but not the name.
When the name is not editable it should be clickable. Such as when
inspecting a Promise value.
The only thing that uses `memoizedState` as a public API is
ClassComponents. Everything else uses it as internals. We shouldn't ever
show those internals.
Before those internals showed up for example on a suspended Suspense
boundary:
<img width="436" height="370" alt="Screenshot 2025-08-03 at 8 13 37 PM"
src="https://github.com/user-attachments/assets/7fe275a7-d5da-421d-a000-523825916630"
/>
This was a pretty glaring memory leak. 🙈
I forgot to clean up the VirtualInstances from the id map so the Server
Component instances always leaked in DEV.
This is modeling Offscreen boundaries as the thing that unmounts a tree
in the frontend. This will let us model this as a "hide" that preserves
state instead in a follow up but not yet.
By doing it this way, we don't have to special case suspended Suspense
boundaries, at least not for the modern versions that use Offscreen as
the internal node. It's still special cased for the old React versions.
Instead, this is handled by the Offscreen fiber getting hidden.
By giving this fiber an FilteredFiberInstance, we also have somewhere to
store the children on (separately from the parent children set which can
include other siblings too like the loading state).
One consequence is that Activity boundary content now disappears when
they're hidden which is probably a good thing since otherwise it would
be confusing and noisy when it's used to render multiple pages at once.
Follow up to #34050.
It's not actually possible to suspend *above* the root since even if you
suspend in the first child position, you're still suspending the
HostRoot which always has a corresponding FiberInstance and
SuspenseNode.
This keeps a data structure of Suspense boundaries and the root which
can keep track which boundaries might participate in a loading sequence
and everything that suspends them. This will power the Suspense tab.
Now when you select a `<Suspense>` boundary the "suspended by" section
shows the whole boundary instead of just that component.
In the future, we'll likely need to add "Activity" boundaries to this
tree as well, so that we can track what suspended the root of an
Activity when filtering a subtree. Similar to how the root SuspenseNode
now tracks suspending at the root. Maybe it's ok to just traverse to
collect this information on-demand when you select one though since this
doesn't contribute to the deduping.
We'll also need to add implicit Suspense boundaries for the rows of a
SuspenseList with `tail=hidden/collapsed`.
Stacked on #34016.
This is using the same thing we already do for the performance track to
provide a description of the I/O based on the content of the resolved
Promise. E.g. a Response's URL.
<img width="375" height="388" alt="Screenshot 2025-07-28 at 1 09 49 AM"
src="https://github.com/user-attachments/assets/f3fdc40f-4e21-4e83-b49e-21c7ec975137"
/>
Stacked on #34012.
This shows a time track for when some I/O started and when it finished
relative to other I/O in the same component (or later in the same
suspense boundary).
This is not meant to be a precise visualization since the data might be
misleading if you're running this in dev which has other perf
characteristics anyway. It's just meant to be a general way to orient
yourself in the data.
We can also highlight rejected promises here.
The color scheme is the same as Chrome's current Performance Track
colors to add continuity but those could change.
<img width="478" height="480" alt="Screenshot 2025-07-27 at 11 48 03 PM"
src="https://github.com/user-attachments/assets/545dd591-a91f-4c47-be96-41d80f09a94a"
/>
This collects the ReactAsyncInfo between instances. It associates it
with the parent. Typically this would be a Server Component's Promise
return value but it can also be Promises in a fragment. It can also be
associated with a client component when you pass a Promise into the
child position e.g. `<div>{promise}</div>` then it's associated with the
div. If an instance is filtered, then it gets associated with the parent
of that's unfiltered.
The stack trace currently isn't source mapped. I'll do that in a follow
up.
We also need to add a "short name" from the Promise for the description
(e.g. url). I'll also add a little marker showing the relative time span
of each entry.
<img width="447" height="591" alt="Screenshot 2025-07-26 at 7 56 00 PM"
src="https://github.com/user-attachments/assets/7c966540-7b1b-4568-8cb9-f25cefd5a918"
/>
<img width="446" height="570" alt="Screenshot 2025-07-26 at 7 55 23 PM"
src="https://github.com/user-attachments/assets/4eac235b-e735-41e8-9c6e-a7633af64e4b"
/>
Stacked on #33983.
Previously, the source of truth is the url stored in local storage but
that means if we change the presets then they don't take effect (e.g.
#33994). This PR uses the hardcoded value instead when a preset is
selected.
This also has the benefit that if you switch between custom and vs code
in the selector, then the custom url is preserved instead of getting
reset when you checkout other options.
Currently the default is custom with empty string, which means that
there's no code editor configured at all by default. It doesn't make a
lot of sense that we have it not working by default when so many people
use VS Code. So this also makes VS Code the default if there's no
EDITOR_URL env specified.
Stacked on #33983.
Allow React to be configured as the default handler of all links in
Chrome DevTools. To do this you need to configure the Chrome DevTools
setting for "Link Handling:" to be set to "React Developer Tools". By
default this doesn't do anything but if you then check the box added in
#33983 it starts open local files directly in the external editor.
This needs docs to show how to enable that option.
(As far as I can tell this broke in Chrome Canary 🙄 but hopefully fixed
before stable.)
We should jump to the right column.
Unfortunately, the way presets are set up now you have to switch off and
switch to the preset for this to take effect.
The `useOpenResource` hook is now used to open links. Currently, the
`<>` icon for the component stacks and the link in the bottom of the
components stack. But it'll also be used for many new links like stacks.
If this new option is configured, and this is a local file then this is
opened directly in the external editor. Otherwise it fallbacks to open
in the Sources tab or whatever the standalone or inline is configured to
use.
<img width="453" height="252" alt="Screenshot 2025-07-24 at 4 09 09 PM"
src="https://github.com/user-attachments/assets/04cae170-dd30-4485-a9ee-e8fe1612978e"
/>
I prominently surface this option in the Source pane to make it
discoverable.
<img width="588" height="144" alt="Screenshot 2025-07-24 at 4 03 48 PM"
src="https://github.com/user-attachments/assets/0f3a7da9-2fae-4b5b-90ec-769c5a9c5361"
/>
When this is configured, the "Open in Editor" is hidden since that's
just the default. I plan on deprecating this button to avoid having the
two buttons going forward.
Notably there's one exception where this doesn't work. When you click an
Action or Event listener it takes you to the Sources tab and you have to
open in editor from there. That's because we use the `inspect()`
mechanism instead of extracting the source location. That's because we
can't do the "throw trick" since these can have side-effects. The Chrome
debugger protocol would solve this but it pops up an annoying dialog. We
could maybe only attach the debugger only for that case. Especially if
the dialog disappears before you focus on the browser again.
We currently throw away the Error once we've used to the owner stack of
a Fiber once. This maybe helps a bit with memory and redoing it but we
really don't expect most Fibers to hit this at all. It's not very hot.
If we throw away the Error, then we can't use native debugger protocols
to inspect the native stack. Instead, we'd have to maintain a url to
resource map indefinitely like what Chrome DevTools does to map a url to
a resource. Technically it's not even technically correct since the file
path might not be reversible and could in theory conflict.
This adds a "Code Editor" pane for the Chrome extension in the bottom
right corner of the "Sources" panel. If you end up getting linked to the
"Sources" panel from stack traces in console, performance tab, stacks in
React Component tab like the one added in #33954 basically everywhere
there's a link to source code. Then going from there to open in a code
editor should be more convenient. This adds a button to open the current
file.
<img width="1387" height="389" alt="Screenshot 2025-07-22 at 10 22
19 PM"
src="https://github.com/user-attachments/assets/fe01f84c-83c2-4639-9b64-4af1a90c3f7d"
/>
This only makes sense in the extensions since in standalone it needs to
always open by default in an editor. Unfortunately Firefox doesn't
support extending the Sources panel.
Chrome is also a bit buggy where it doesn't send a selection update
event when you switch tabs in the Sources panel. Only when the actual
cursor position changes. This means that the link can be lagging behind
sometimes. We also have some general bugs where if React DevTools loses
connection it can break the UI which includes this pane too.
This has a small inline configuration too so that it's discoverable:
<img width="559" height="143" alt="Screenshot 2025-07-22 at 10 22 42 PM"
src="https://github.com/user-attachments/assets/1270bda8-ce10-4f9d-9fcb-080c0198366a"
/>
<img width="527" height="123" alt="Screenshot 2025-07-22 at 10 22 30 PM"
src="https://github.com/user-attachments/assets/45848c95-afd8-495f-a7cf-eb2f46e698f2"
/>
Since we can't add a separate link to open-in-editor or open-in-sources
everywhere I plan on adding an option to open in editor by default in a
follow up. That option needs to be even more discoverable.
I moved the configuration from the Components settings to the General
settings since this is now a much more general features for opening
links to resources in all types of panes.
<img width="673" height="311" alt="Screenshot 2025-07-22 at 10 22 57 PM"
src="https://github.com/user-attachments/assets/ea2c0871-942c-4b55-a362-025835d2c2bd"
/>
If a `file:///` path is specified as the url of a file, like after
source mapping into an ESM file, then we should be able to open it in a
code editor.
In RSC and other stacks now we use a lot of `ReactFunctionLocation` type
to represent the location of a function. I.e. the location of the
beginning of the function (the enclosing line/col) that is represented
by the "Source" of the function. This is also what the parent Component
Stacks represents.
As opposed to `ReactCallSite` which is what normal stack traces and
owner stacks represent. I.e. the line/column number of the callsite into
the next function.
We can start sharing more code by using the `ReactFunctionLocation` type
to represent the component source location and it also helps clarify
which ones are function locations and which ones are callsites as we
start adding more stack traces (e.g. for async debug info and owner
stack traces).
This makes it so you can click the source location itself to view the
source. This is similar styling as the link to jump to function props
like events and actions. We're going to need a lot more linkifying to
jump to various source locations. Also, I always was trying to click
this file anyway.
Hover state:
<img width="485" height="382" alt="Screenshot 2025-07-21 at 4 36 10 PM"
src="https://github.com/user-attachments/assets/1f0f8f8c-6866-4e62-ab84-1fb5ba012986"
/>
Follow-up to https://github.com/facebook/react/pull/33652.
Don't know how the other were missed. Double-checked that Profiler works
in dev mode.
Now all hooks start with `!isProfiling` check and return, if true.
`react-stack-bottom-frame` -> `react_stack_bottom_frame`.
This survives `@babel/plugin-transform-function-name`, but now frames
will be displayed as `at Object.react_stack_bottom_frame (...)` in V8.
Checks that were relying on exact function name match were updated to
use either `.indexOf()` or `.includes()`
For backwards compatibility, both React DevTools and Flight Client will
look for both options. I am not so sure about the latter and if React
version is locked.
## Summary
This floods Timings track in dev mode and also hurts performance in dev.
Making sure we are buffering Performance entries (all of them are marks)
only when profiling in RDT. This should be removed once we roll out Perf
tracks.
This is using the same trick as #30798 but for runtime code too. It's
essential zero cost.
This lets us include a source location for parent stacks of Server
Components when it has an owned child's location. Either from JSX or
I/O.
Ironically, a Component that throws an error will likely itself not get
the stack because it won't have any JSX rendered yet.
## Summary
The devtools Components tab's component tree view currently has a
behavior where the indentation of each level of the tree scales based on
the available width of the view. If the view is narrow or component
names are long, all indentation showing the hierarchy of the tree scales
down with the view width until there is no indentation at all. This
makes it impossible to see the nesting of the tree, making the tree view
much less useful. With long component names and deep hierarchies this
issue is particularly egregious. For comparison, the Chrome Dev Tools
Elements panel uses a fixed indentation size, so it doesn't suffer from
this issue.
This PR adds a minimum pixel value for the indentation width, so that
even when the window is narrow some indentation will still be visible,
maintaining the visual representation of the component tree hierarchy.
Alternatively, we could match the behavior of the Chrome Dev Tools and
just use a constant indentation width.
## How did you test this change?
- tests (yarn test-build-devtools)
- tested in browser:
- added an alternate left/right split pane layout to
react-devtools-shell to test with
(https://github.com/facebook/react/pull/33516)
- tested resizing the tree view in different layout modes
### before this change:
https://github.com/user-attachments/assets/470991f1-dc05-473f-a2cb-4f7333f6bae4
with a long component name:
https://github.com/user-attachments/assets/1568fc64-c7d7-4659-bfb1-9bfc9592fb9d
### after this change:
https://github.com/user-attachments/assets/f60bd7fc-97f6-4680-9656-f0db3d155411
with a long component name:
https://github.com/user-attachments/assets/6ac3f58c-42ea-4c5a-9a52-c3b397f37b45
## Summary
This tool leverages DevTools to get the component tree from the
currently open React App. This gives realtime information to agents
about the state of the app.
## How did you test this change?
Tested integration with Claude Desktop
