I'm a bit ambivalent about this one because it's not the main strategy
that I plan on pursuing. I plan on replacing most DEV-only specific
stacks like `console.error` stacks with a new take on owner stacks and
native stacks. The future owner stacks may or may not be exposed to
error boundaries in DEV but if they are they'd be a new errorInfo
property since they're owner based and not available in prod.
The use case in `console.error` mostly goes away in the future so this
PR is mainly for error boundaries. It doesn't hurt to have it in there
while I'm working on the better stacks though.
The `componentStack` property exposed to error boundaries is more like
production behavior similar to `new Error().stack` (which even in DEV
won't ever expose owner stacks because `console.createTask` doesn't
affect these). I'm not sure it's worth adding server components in DEV
(this PR) because then you have forked behavior between dev and prod.
However, since even in the future there won't be any other place to get
the *parent* stack, maybe this can be useful information even if it's
only dev. We could expose a third property on errorInfo that's DEV only
and parent stack but including server components. That doesn't seem
worth it over just having the stack differ in dev and prod.
I don't plan on adding line/column number to these particular stacks.
A follow up could be to add this to Fizz prerender too but only in DEV.
Following https://github.com/facebook/react/pull/28265, this should
disable location-based component filters.
```
// Following __debugSource removal from Fiber, the new approach for finding the source location
// of a component, represented by the Fiber, is based on lazily generating and parsing component stack frames
// To find the original location, React DevTools will perform symbolication, source maps are required for that.
// In order to start filtering Fibers, we need to find location for all of them, which can't be done lazily.
// Eager symbolication can become quite expensive for large applications.
```
I am planning to publish a patch version of RDT soon, so I think its
better to remove this feature, instead of shipping it in a broken state.
The reason for filtering out these filters is a potential cases, where
we load filters from the backend (like in RN, where we storing some
settings on device), or these filters can be stored in user land
(`window.__REACT_DEVTOOLS_COMPONENT_FILTERS__`).
Explicitly tested the case when:
1. Load current RDT extension, add location-based component filter
2. Reload the page and observe that previously created component filter
is preserved
3. Re-load RDT extension with these changes, observe there is no
previously created component filter and user can't create a new
location-based filter
4. Reload RDT extension without these changes, no location-based filters
saved, user can create location-based filters
1. Bumps `react-virtualized-auto-sizer` to 1.0.23, which has a fix for
cases with multiple realms -
https://github.com/bvaughn/react-virtualized-auto-sizer/pull/82
2. Removes `react-window` from react-devtools-shared/src/node_modules,
now listed as dependency in `package.json` and bumped to 1.8.10
Tested:
- Chrome extension
- Standalone shell with RN
Depends on:
- #28317
- #28320
---
Changes the behavior of the JSX runtime to pass through `ref` as a
normal prop, rather than plucking it from the props object and storing
on the element.
This is a breaking change since it changes the type of the receiving
component. However, most code is unaffected since it's unlikely that a
component would have attempted to access a `ref` prop, since it was not
possible to get a reference to one.
`forwardRef` _will_ still pluck `ref` from the props object, though,
since it's extremely common for users to spread the props object onto
the inner component and pass `ref` as a differently named prop. This is
for maximum compatibility with existing code — the real impact of this
change is that `forwardRef` is no longer required.
Currently, refs are resolved during child reconciliation and stored on
the fiber. As a result of this change, we can move ref resolution to
happen only much later, and only for components that actually use them.
Then we can remove the `ref` field from the Fiber type. I have not yet
done that in this step, though.
Depends on:
- #28317
---
There's a ton of overlap between the createElement implementation and
the JSX implementation, so I combined them into a single module.
In the actual build output, the shared code between JSX and
createElement will get duplicated anyway, because react/jsx-runtime and
react (where createElement lives) are separate, flat build artifacts.
So this is more about code organization — with a few key exceptions, the
implementations of createElement and jsx are highly coupled.
This option was added defensively but it's not needed. There's no cost
to including it always.
I suspect this optional was added mainly to avoid needing to update
tests. That's not a reason to have an unnecessary public API though.
We have a praxis for dealing with source location in tests to avoid them
failing tests. I also ported them to inline snapshots so that additions
to the protocol isn't such a pain.
Previously, `<Context>` was equivalent to `<Context.Consumer>`. However,
since the introduction of Hooks, the `<Context.Consumer>` API is rarely
used. The goal here is to make the common case cleaner:
```js
const ThemeContext = createContext('light')
function App() {
return (
<ThemeContext value="dark">
...
</ThemeContext>
)
}
function Button() {
const theme = use(ThemeContext)
// ...
}
```
This is technically a breaking change, but we've been warning about
rendering `<Context>` directly for several years by now, so it's
unlikely much code in the wild depends on the old behavior. [Proof that
it warns today (check
console).](https://codesandbox.io/p/sandbox/peaceful-nobel-pdxtfl)
---
**The relevant commit is 5696782b428a5ace96e66c1857e13249b6c07958.** It
switches `createContext` implementation so that `Context.Provider ===
Context`.
The main assumption that changed is that a Provider's fiber type is now
the context itself (rather than an intermediate object). Whereas a
Consumer's fiber type is now always an intermediate object (rather than
it being sometimes the context itself and sometimes an intermediate
object).
My methodology was to start with the relevant symbols, work tags, and
types, and work my way backwards to all usages.
This might break tooling that depends on inspecting React's internal
fields. I've added DevTools support in the second commit. This didn't
need explicit versioning—the structure tells us enough.
Alternative to #28295.
Instead of stashing all of the Usables eagerly, we can extract them by
replaying the render when we need them like we do with any other hook.
We already had an implementation of `use()` but it wasn't quite
complete.
These can also include further DebugInfo on them such as what Server
Component rendered the Promise or async debug info. This is nice just to
see which use() calls were made in the side-panel but it can also be
used to gather everything that might have suspended.
Together with https://github.com/facebook/react/pull/28286 we cover the
case when a Promise was used a child and if it was unwrapped with use().
Notably we don't cover a Promise that was thrown (although we do support
that in a Server Component which maybe we shouldn't). Throwing a Promise
isn't officially supported though and that use case should move to the
use() Hook.
The pattern of conditionally suspending based on cache also isn't really
supported with the use() pattern. You should always call use() if you
previously called use() with the same input. This also ensures that we
can track what might have suspended rather than what actually did.
One limitation of this strategy is that it's hard to find all the places
something might suspend in a tree without rerendering all the fibers
again. So we might need to still add something to the tree to indicate
which Fibers may have further debug info / thenables.
In our custom implementation for handling modals dismiss signal, we use
element's `ownerDocument` field, which expectedly doesn't work well with
shadow root. Now using
[`getRootNode`](https://developer.mozilla.org/en-US/docs/Web/API/Node/getRootNode)
instead of `ownerDocument` to support shadow root case.
Without this, if RDT Frontend is hosted inside the shadow root, the
modal gets closed after any click, including on the buttons hosted by
modal:
00d42ac354/packages/react-devtools-shared/src/devtools/views/hooks.js (L228-L238)
Test plan:
- Modals work as expected for Chrome DevTools integration
- Modals work as expected at every other surfaces: browser extension,
electron wrapper for RN, inline version for web
Along with all the places using it like the `_debugSource` on Fiber.
This still lets them be passed into `createElement` (and JSX dev
runtime) since those can still be used in existing already compiled code
and we don't want that to start spreading to DOM attributes.
We used to have a DEV mode that compiles the source location of JSX into
the compiled output. This was nice because we could get the actual call
site of the JSX (instead of just somewhere in the component). It had a
bunch of issues though:
- It only works with JSX.
- The way this source location is compiled is different in all the
pipelines along the way. It relies on this transform being first and the
source location we want to extract but it doesn't get preserved along
source maps and don't have a way to be connected to the source hosted by
the source maps. Ideally it should just use the mechanism other source
maps use.
- Since it's expensive it only works in DEV so if it's used for
component stacks it would vary between dev and prod.
- It only captures the callsite of the JSX and not the stack between the
component and that callsite. In the happy case it's in the component but
not always.
Instead, we have another zero-cost trick to extract the call site of
each component lazily only if it's needed. This ensures that component
stacks are the same in DEV and PROD. At the cost of worse line number
information.
The better way to get the JSX call site would be to get it from `new
Error()` or `console.createTask()` inside the JSX runtime which can
capture the whole stack in a consistent way with other source mappings.
We might explore that in the future.
This removes source location info from React DevTools and React Native
Inspector. The "jump to source code" feature or inspection can be made
lazy instead by invoking the lazy component stack frame generation. That
way it can be made to work in prod too. The filtering based on file path
is a bit trickier.
When redesigned this UI should ideally also account for more than one
stack frame.
With this change the DEV only Babel transforms are effectively
deprecated since they're not necessary for anything.
Adding getter-functions for renderer implementations, which can be used
for jest tests. If we are testing against React with version < 18, we
are going to use legacy rendering, otherwise the concurrent one.
- Moving `act` implementation to a single getter-function, which is
based on React version we are testing RDT against.
- Removing unused mocks for `act`, which were designed for legacy
versions of React, validated with running tests against React 16 build.
Starting in version 19, users can import the `act` testing API from the
`react` package instead of using a renderer specific API, like
`react-dom/test-utils`.
This Flow upgrade includes 2 fixes:
- Remove `React$StatelessFunctionalComponent` as that was replaced by
just `React$AbstractComponent` as Flow doesn't make any guarantees, see
the Flow change here:
521317c48f
- Flow no longer allows `number` type indexing into objects which
discovered an incorrect type that is actually an array of the data.
Used this command to upgrade
```
yarn add -W flow-bin flow-remove-types hermes-parser hermes-eslint
```
and ran `yarn flow-ci` to check for errors in different configurations.
https://github.com/facebook/react/pull/27805 broke integration tests for
React DevTools with React 17, these changes introduce a fallback for
such case when `act` is not available in `react`, but available in
`react-dom`, like before.
## Summary
Concurrent rendering has been the default since React 18 release.
ReactTestRenderer requires passing `{unstable_isConcurrent: true}` to
match this behavior, which means by default tests written with RTR use a
different rendering method than the code they test.
Eventually, RTR should only use ConcurrentRoot. As a first step, let's
add a version of the concurrent option that isn't marked unstable. Next
we will follow up with removing the unstable option when it is safe to
merge.
## How did you test this change?
`yarn test
packages/react-test-renderer/src/__tests__/ReactTestRendererAsync-test.js`
As part of the process of removing the deprecated `react-dom/test-utils`
package references to `act` from this module are replaced with
references to `unstable_act` in `react`. It is likely that the unstable
act implementation will be made stable. The test utils act is just a
reexport of the unstable_act implementation in react itself.
Adds `Forget` badge to all relevant components.
Changes:
- If component is compiled with Forget and using a built-in
`useMemoCache` hook, it will have a `Forget` badge next to its display
name in:
- components tree
- inspected element view
- owners list
- Such badges are indexable, so Forget components can be searched using
search bar.
Fixes:
- Displaying the badges for owners list inside the inspected component
view
Implementation:
- React DevTools backend is responsible for identifying if component is
compiled with Forget, based on `fiber.updateQueue.memoCache`. It will
wrap component's display name with `Forget(...)` prefix before passing
operations to the frontend. On the frontend side, we will parse the
display name and strip Forget prefix, marking the corresponding element
by setting `compiledWithForget` field. Almost the same logic is
currently used for HOC display names.
We are currently just pass the first element, which diverges from the
implementation for web. This is especially bad if you are inspecting
something like a list, where host fiber can represent multiple elements.
This part runs on the backend of React DevTools, so it should not affect
cases for React Native when frontend version can be more up-to-date than
backend's. I will double-check it before merging.
Once version of `react-devtools-core` is updated in React Native, this
should be supported, I will work on that later.
Had these stashed for some time, it includes:
- Some refactoring to remove unnecessary `FlowFixMe`s and type castings
via `any`.
- Optimized version of parsing component names. We encode string names
to utf8 and then pass it serialized from backend to frontend in a single
array of numbers. Previously we would call `slice` to get the
corresponding encoded string as a subarray and then parse each
character. New implementation skips `slice` step and just receives
`left` and `right` ranges for the string to parse.
- Early `break` instead of `continue` when Store receives unexpected
operation, like removing an element from the Store, which is not
registered yet.
Updates useFormState to allow a sync function to be passed as an action.
A form action is almost always async, because it needs to talk to the
server. But since we support client-side actions, too, there's no reason
we can't allow sync actions, too.
I originally chose not to allow them to keep the implementation simpler
but it's not really that much more complicated because we already
support this for actions passed to startTransition. So now it's
consistent: anywhere an action is accepted, a sync client function is a
valid input.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Updated the typo in test description
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
NA, correct test description improves readability of the code and
confusion for anyone who is new to the codebase.
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
### Based on https://github.com/facebook/react/pull/27505
If a parent render spawns a deferred task with useDeferredValue, but the
parent render suspends, we should not wait for the parent render to
complete before attempting to render the final value.
The reason is that the initialValue argument to useDeferredValue is
meant to represent an immediate preview of the final UI. If we can't
render it "immediately", we might as well skip it and go straight to the
"real" value.
This is an improvement over how a userspace implementation of
useDeferredValue would work, because a userspace implementation would
have to wait for the parent task to commit (useEffect) before spawning
the deferred task, creating a waterfall.
