- method unbinding is no longer supported in Flow for soundness, this added a bunch of suppressions
- Flow now prevents objects to be supertypes of interfaces/classes
ghstack-source-id: d7749cbad8
Pull Request resolved: https://github.com/facebook/react/pull/25412
* Internal `act`: Unwrapping resolved promises
This update our internal implementation of `act` to support React's new
behavior for unwrapping promises. Like we did with Scheduler, when
something suspends, it will yield to the main thread so the microtasks
can run, then continue in a new task.
I need to implement the same behavior in the public version of `act`,
but there are some additional considerations so I'll do that in a
separate commit.
* Move throwException to after work loop resumes
throwException is the function that finds the nearest boundary and
schedules it for a second render pass. We should only call it right
before we unwind the stack — not if we receive an immediate ping and
render the fiber again.
This was an oversight in 8ef3a7c that I didn't notice because it happens
to mostly work, anyway. What made me notice the mistake is that
throwException also marks the entire render phase as suspended
(RootDidSuspend or RootDidSuspendWithDelay), which is only supposed to
be happen if we show a fallback. One consequence was that, in the
RootDidSuspendWithDelay case, the entire commit phase was blocked,
because that's the exit status we use to block a bad fallback
from appearing.
* Use expando to check whether promise has resolved
Add a `status` expando to a thrown thenable to track when its value has
resolved.
In a later step, we'll also use `value` and `reason` expandos to track
the resolved value.
This is not part of the official JavaScript spec — think of
it as an extension of the Promise API, or a custom interface that is a
superset of Thenable. However, it's inspired by the terminology used
by `Promise.allSettled`.
The intent is that this will be a public API — Suspense implementations
can set these expandos to allow React to unwrap the value synchronously
without waiting a microtask.
* Scaffolding for `experimental_use` hook
Sets up a new experimental hook behind a feature flag, but does not
implement it yet.
* use(promise)
Adds experimental support to Fiber for unwrapping the value of a promise
inside a component. It is not yet implemented for Server Components,
but that is planned.
If promise has already resolved, the value can be unwrapped
"immediately" without showing a fallback. The trick we use to implement
this is to yield to the main thread (literally suspending the work
loop), wait for the microtask queue to drain, then check if the promise
resolved in the meantime. If so, we can resume the last attempted fiber
without unwinding the stack. This functionality was implemented in
previous commits.
Another feature is that the promises do not need to be cached between
attempts. Because we assume idempotent execution of components, React
will track the promises that were used during the previous attempt and
reuse the result. You shouldn't rely on this property, but during
initial render it mostly just works. Updates are trickier, though,
because if you used an uncached promise, we have no way of knowing
whether the underlying data has changed, so we have to unwrap the
promise every time. It will still work, but it's inefficient and can
lead to unnecessary fallbacks if it happens during a discrete update.
When we implement this for Server Components, this will be less of an
issue because there are no updates in that environment. However, it's
still better for performance to cache data requests, so the same
principles largely apply.
The intention is that this will eventually be the only supported way to
suspend on arbitrary promises. Throwing a promise directly will
be deprecated.
* Remove object-assign polyfill
We really rely on a more modern environment where this is typically
polyfilled anyway and we don't officially support IE with more extensive
polyfilling anyway. So all environments should have the native version
by now.
* Use shared/assign instead of Object.assign in code
This is so that we have one cached local instance in the bundle.
Ideally we should have a compile do this for us but we already follow
this pattern with hasOwnProperty, isArray, Object.is etc.
* Transform Object.assign to now use shared/assign
We need this to use the shared instance when Object.spread is used.
If a hydration root receives an update before the outermost shell has
finished hydrating, we should give up hydrating and switch to
client rendering.
Since the shell is expected to commit quickly, this doesn't happen that
often. The most common sequence is something in the shell suspends, and
then the user quickly navigates to a different screen, triggering a
top-level update.
Instead of immediately switching to client rendering, we could first
attempt to hydration at higher priority, like we do for updates that
occur inside nested dehydrated trees.
But since this case is expected to be rare, and mainly only happens when
the shell is suspended, an attempt at higher priority would likely end
up suspending again anyway, so it would be wasted effort. Implementing
it this way would also require us to add a new lane especially for root
hydration. For simplicity's sake, we'll immediately switch to client
rendering. In the future, if we find another use case for a root
hydration lane, we'll reconsider.
* Add .browser and .node explicit entry points
This can be useful when the automatic selection doesn't work properly.
* Remove react/index
I'm not sure why I added this in the first place. Perhaps due to how our
builds work somehow.
* Remove build-info.json from files field
* Extract `act` environment check into function
`act` checks the environment to determine whether to fire a warning.
We're changing how this check works in React 18. As a first step, this
refactors the logic into a single function. No behavior changes yet.
* Use IS_REACT_ACT_ENVIRONMENT to disable warnings
If `IS_REACT_ACT_ENVIRONMENT` is set to `false`, we will suppress
any `act` warnings. Otherwise, the behavior of `act` is the same as in
React 17: if `jest` is defined, it warns.
In concurrent mode, the plan is to remove the `jest` check and only warn
if `IS_REACT_ACT_ENVIRONMENT` is true. I have not implemented that
part yet.
* Hoist error codes import to module scope
When this code was written, the error codes map (`codes.json`) was
created on-the-fly, so we had to lazily require from inside the visitor.
Because `codes.json` is now checked into source, we can import it a
single time in module scope.
* Minify error constructors in production
We use a script to minify our error messages in production. Each message
is assigned an error code, defined in `scripts/error-codes/codes.json`.
Then our build script replaces the messages with a link to our
error decoder page, e.g. https://reactjs.org/docs/error-decoder.html/?invariant=92
This enables us to write helpful error messages without increasing the
bundle size.
Right now, the script only works for `invariant` calls. It does not work
if you throw an Error object. This is an old Facebookism that we don't
really need, other than the fact that our error minification script
relies on it.
So, I've updated the script to minify error constructors, too:
Input:
Error(`A ${adj} message that contains ${noun}`);
Output:
Error(formatProdErrorMessage(ERR_CODE, adj, noun));
It only works for constructors that are literally named Error, though we
could add support for other names, too.
As a next step, I will add a lint rule to enforce that errors written
this way must have a corresponding error code.
* Minify "no fallback UI specified" error in prod
This error message wasn't being minified because it doesn't use
invariant. The reason it didn't use invariant is because this particular
error is created without begin thrown — it doesn't need to be thrown
because it's located inside the error handling part of the runtime.
Now that the error minification script supports Error constructors, we
can minify it by assigning it a production error code in
`scripts/error-codes/codes.json`.
To support the use of Error constructors more generally, I will add a
lint rule that enforces each message has a corresponding error code.
* Lint rule to detect unminified errors
Adds a lint rule that detects when an Error constructor is used without
a corresponding production error code.
We already have this for `invariant`, but not for regular errors, i.e.
`throw new Error(msg)`. There's also nothing that enforces the use of
`invariant` besides convention.
There are some packages where we don't care to minify errors. These are
packages that run in environments where bundle size is not a concern,
like react-pg. I added an override in the ESLint config to ignore these.
* Temporarily add invariant codemod script
I'm adding this codemod to the repo temporarily, but I'll revert it
in the same PR. That way we don't have to check it in but it's still
accessible (via the PR) if we need it later.
* [Automated] Codemod invariant -> Error
This commit contains only automated changes:
npx jscodeshift -t scripts/codemod-invariant.js packages --ignore-pattern="node_modules/**/*"
yarn linc --fix
yarn prettier
I will do any manual touch ups in separate commits so they're easier
to review.
* Remove temporary codemod script
This reverts the codemod script and ESLint config I added temporarily
in order to perform the invariant codemod.
* Manual touch ups
A few manual changes I made after the codemod ran.
* Enable error code transform per package
Currently we're not consistent about which packages should have their
errors minified in production and which ones should.
This adds a field to the bundle configuration to control whether to
apply the transform. We should decide what the criteria is going
forward. I think it's probably a good idea to minify any package that
gets sent over the network. So yes to modules that run in the browser,
and no to modules that run on the server and during development only.
* Move internal version of act to shared module
No reason to have three different copies of this anymore.
I've left the the renderer-specific `act` entry points because legacy
mode tests need to also be wrapped in `batchedUpdates`. Next, I'll update
the tests to use `batchedUpdates` manually when needed.
* Migrates tests to use internal module directly
Instead of the `unstable_concurrentAct` exports. Now we can drop those
from the public builds.
I put it in the jest-react package since that's where we put our other
testing utilities (like `toFlushAndYield`). Not so much so it can be
consumed publicly (nobody uses that package except us), but so it works
with our build tests.
* Remove unused internal fields
These were used by the old act implementation. No longer needed.
* Remove redundant initial of isArray (#21163)
* Reapply prettier
* Type the isArray function with refinement support
This ensures that an argument gets refined just like it does if isArray is
used directly.
I'm not sure how to express with just a direct reference so I added a
function wrapper and confirmed that this does get inlined properly by
closure compiler.
* A few more
* Rename unit test to internal
This is not testing a bundle.
Co-authored-by: Behnam Mohammadi <itten@live.com>
* Enable prefer-const rule
Stylistically I don't like this but Closure Compiler takes advantage of
this information.
* Auto-fix lints
* Manually fix the remaining callsites
This reverts commit cf0081263c.
The changes to the test code relate to changes in JSDOM that come with Jest 25:
* Several JSDOM workarounds are no longer needed.
* Several tests made assertions to match incorrect JSDOM behavior (e.g. setAttribute calls) that JSDOM has now patched to match browsers.
* https://codesandbox.io/s/resets-value-of-datetime-input-to-fix-bugs-in-ios-safari-1ppwh
* JSDOM no longer triggers default actions when dispatching click events.
* https://codesandbox.io/s/beautiful-cdn-ugn8f
* JSDOM fixed (jsdom/jsdom#2700) a bug so that calling focus() on an already focused element does not dispatch a FocusEvent.
* JSDOM now supports passive events.
* JSDOM has improved support for custom CSS properties.
* But requires jsdom/cssstyle#112 to land to support webkit prefixed properties.
The publish script was written before we switched to running patch
releases out-of-band, so when updating the local package.json version
numbers, it accidentally reverted other changes that have landed to
master since 16.13 was released.
* Only use Rollup's CommonJS plugin for "react-art"
We still need it for the "art" UMD builds but nothing else should have
CommonJS dependencies anymore.
* react-debug-tools and jest-react should leave object-assign as an external dep
This avoids it being compiled into the output.
The changes to the test code relate to changes in JSDOM that come with Jest 25:
* Several JSDOM workarounds are no longer needed.
* Several tests made assertions to match incorrect JSDOM behavior (e.g. setAttribute calls) that JSDOM has now patched to match browsers.
* https://codesandbox.io/s/resets-value-of-datetime-input-to-fix-bugs-in-ios-safari-1ppwh
* JSDOM no longer triggers default actions when dispatching click events.
* https://codesandbox.io/s/beautiful-cdn-ugn8f
* JSDOM fixed (jsdom/jsdom#2700) a bug so that calling focus() on an already focused element does not dispatch a FocusEvent.
* JSDOM now supports passive events.
* JSDOM has improved support for custom CSS properties.
* But requires jsdom/cssstyle#112 to land to support webkit prefixed properties.
* Swap expect(ReactNoop) for expect(Scheduler)
In the previous commits, I upgraded our custom Jest matchers for the
noop and test renderers to use Scheduler under the hood.
Now that all these matchers are using Scheduler, we can drop
support for passing ReactNoop and test roots and always pass
Scheduler directly.
* Externalize Scheduler in noop and test bundles
I also noticed we don't need to regenerator runtime in noop anymore.
* Replace test renderer's fake Scheduler implementation with mock build
The test renderer has its own mock implementation of the Scheduler
interface, with the ability to partially render work in tests. Now that
this functionality has been lifted into a proper mock Scheduler build,
we can use that instead.
* Fix Profiler tests in prod
Specifying the directory as part of the `repository` field in a `package.json`
allows third party tools to provide better support when working with monorepos.
For example, it allows them to correctly construct a commit diff for a specific
package.
This format was accepted by npm in https://github.com/npm/rfcs/pull/19.
