Alternative to #33421. The difference is that this also adds an
underscore between the "R" and the ID.
The reason we wanted to use special characters is because we use the
full spectrum of A-Z 0-9 in our ID generation so we can basically
collide with any common word (or anyone using a similar algorithm,
base64 or even base16). It's a little less likely that someone would put
`_R_` specifically unless you generate like two IDs separated by
underscore.
The semantics of React is that anything outside of Suspense boundaries
in a transition doesn't display until it has fully unsuspended. With SSR
streaming the intention is to preserve that.
We explicitly don't want to support the mode of document streaming
normally supported by the browser where it can paint content as tags
stream in since that leads to content popping in and thrashing in
unpredictable ways. This should instead be modeled explictly by nested
Suspense boundaries or something like SuspenseList.
After the first shell any nested Suspense boundaries are only revealed,
by script, once they're fully streamed in to the next boundary. So this
is already the case there. However, for the initial shell we have been
at the mercy of browser heuristics for how long it decides to stream
before the first paint.
Chromium now has [an API explicitly for this use
case](https://developer.mozilla.org/en-US/docs/Web/API/View_Transition_API/Using#stabilizing_page_state_to_make_cross-document_transitions_consistent)
that lets us model the semantics that we want. This is always important
but especially so with MPA View Transitions.
After this a simple document looks like this:
```html
<!DOCTYPE html>
<html>
<head>
<link rel="expect" href="#«R»" blocking="render"/>
</head>
<body>
<p>hello world</p>
<script src="bootstrap.js" id="«R»" async=""></script>
...
</body>
</html>
```
The `rel="expect"` tag indicates that we want to wait to paint until we
have streamed far enough to be able to paint the id `"«R»"` which
indicates the shell.
Ideally this `id` would be assigned to the root most HTML element in the
body. However, this is tricky in our implementation because there can be
multiple and we can render them out of order.
So instead, we assign the id to the first bootstrap script if there is
one since these are always added to the end of the shell. If there isn't
a bootstrap script then we emit an empty `<template
id="«R»"></template>` instead as a marker.
Since we currently put as much as possible in the shell if it's loaded
by the time we render, this can have some negative effects for very
large documents. We should instead apply the heuristic where very large
Suspense boundaries get outlined outside the shell even if they're
immediately available. This means that even prerenders can end up with
script tags.
We only emit the `rel="expect"` if you're rendering a whole document.
I.e. if you rendered either a `<html>` or `<head>` tag. If you're
rendering a partial document, then we don't really know where the
streaming parts are anyway and can't provide such guarantees. This does
apply whether you're streaming or not because we still want to block
rendering until the end, but in practice any serialized state that needs
hydrate should still be embedded after the completion id.
A Flight Server can be a consumer of a stream from another Server. In
this case the meta data is attached to debugInfo properties on lazy,
Promises, Arrays or Elements that might in turn get forwarded to the
next stream. In this case we want to forward this debug information to
the client in the stream.
I also added a DEV only `environmentName` option to the Flight Server.
This lets you name the server that is producing the debug info so that
you can trace the origin of where that component is executing. This
defaults to `"server"`. DevTools could use this for badges or different
colors.
The internal file ReactSharedSubset is what the `react` module resolves
to when imported from a Server Component environment. We gave it this
name because, originally, the idea was that Server Components can access
a subset of the APIs available on the client.
However, since then, we've also added APIs that can _only_ by accessed
on the server and not the client. In other words, it's no longer a
subset, it's a slightly different overlapping set.
So this commit renames ReactSharedSubet to ReactServer and updates all
the references. This does not affect the public API, only our internal
implementation.
For clientReferences we can just check the instance of the
`clientReference`.
The implementation of `isClientReference` is provided via configuration.
The class for ClientReference has to implement an interface that has
`getModuleId() method.
This PR adds a new FB-specific configuration of Flight. We also need to
bundle a version of ReactSharedSubset that will be used for running
Flight on the server.
This initial implementation does not support server actions yet.
The FB-Flight still uses the text protocol on the server (the flag
`enableBinaryFlight` is set to false). It looks like we need some
changes in Hermes to properly support this binary format.
Previously it was possible to postpone in the shell during a prerender
and then during a resume the bootstrap scripts would not be emitted
leading to no hydration on the client. This change moves the bootstrap
configuration to `ResumableState` where it can be serialized after
postponing if it wasn't flushed as part of the static shell.
Code organization PR.
It looks like the `ReactServerStreamConfigFB` is only used in the
`relay-server` package. This PR moves it to `react-server` from
`react-server-dom-fb` (similar to how we have config for bun, for
example). This avoids cross-package imports from `react-server` to
`react-server-dom-fb.`
Refactors Resources to have a more compact and memory efficient
struture. Resources generally are just an Array of chunks. A resource is
flushed when it's chunks is length zero. A resource does not have any
other state.
Stylesheets and Style tags are different and have been modeled as a unit
as a StyleQueue. This object stores the style rules to flush as part of
style tags using precedence as well as all the stylesheets associated
with the precedence. Stylesheets still need to track state because it
affects how we issue boundary completion instructions. Additionally
stylesheets encode chunks lazily because we may never write them as html
if they are discovered late.
The preload props transfer is now maximally compact (only stores the
props we would ever actually adopt) and only stores props for
stylesheets and scripts because other preloads have no resource
counterpart to adopt props into. The ResumableState maps that track
which keys have been observed are being overloaded. Previously if a key
was found it meant that a resource already exists (either in this render
or in a prior prerender). Now we discriminate between null and object
values. If map value is null we can assume the resource exists but if it
is an object that represents a prior preload for that resource and the
resource must still be constructed.
To support MPA-style form submissions, useFormState sends down a key
that represents the identity of the hook on the page. It's based on the
key path of the component within the React tree; for deeply nested
hooks, this keypath can become very long. We can hash the key to make it
shorter.
Adds a method called createFastHash to the Stream Config interface.
We're not using this for security or obfuscation, only to generate a
more compact key without sacrificing too much collision resistance.
- In Node.js builds, createFastHash uses the built-in crypto module.
- In Bun builds, createFastHash uses Bun.hash. See:
https://bun.sh/docs/api/hashing#bun-hash
I have not yet implemented createFastHash in the Edge, Browser, or FB
(Hermes) stream configs because those environments do not have a
built-in hashing function that meets our requirements. (We can't use the
web standard `crypto` API because those methods are async, and yielding
to the main thread is too costly to be worth it for this particular use
case.) We'll likely use a pure JS implementation in those environments;
for now, they just return the original string without hashing it. I'll
address this in separate PRs.
## Summary
Currently `ReactFizzServer.abort` allows you to pass in the a `reason`
error, which then gets passed to the `onError` handler for each task
that ends up getting aborted. This adds in the ability to pass down that
same `reason` error to `ReactDOMServerFB.abortStream` as well.
## How did you test this change?
Added a test case to ReactDOMServerFB-test.internal.js
Moves writing queues to renderState.
We shouldn't need the resource tracking's value. We just need to know if
that resource has already been emitted. We can use a Set for this. To
ensure that set is directly serializable we can just use a
dictionary-like object with no value.
See individual commits for special cases.
Just moving some internal code around again.
I originally encoded what type of work using startRender vs
startPrerender. I had intended to do more forking of the work loop but
we've decided not to go with that strategy. It also turns out that
forking when we start working is actually too late because of a subtle
thing where you can call abort before work begins. Therefore it's
important that starting the work comes later.
This is basically the implementation for the prerender pass.
Instead of forking basically the whole implementation for prerender, I
just add a conditional field on the request. If it's `null` it behaves
like before. If it's non-`null` then instead of triggering client
rendered boundaries it triggers those into a "postponed" state which is
basically just a variant of "pending". It's supposed to be filled in
later.
It also builds up a serializable tree of which path can be followed to
find the holes. This is basically a reverse `KeyPath` tree.
It is unfortunate that this approach adds more code to the regular Fizz
builds but in practice. It seems like this side is not going to add much
code and we might instead just want to merge the builds so that it's
smaller when you have `prerender` and `resume` in the same bundle -
which I think will be common in practice.
This just implements the prerender side, and not the resume side, which
is why the tests have a TODO. That's in a follow up PR.
This exposes a `resume()` API to go with the `prerender()` (only in
experimental). It doesn't work yet since we don't yet emit the postponed
state so not yet tested.
The main thing this does is rename ResponseState->RenderState and
Resources->ResumableState. We separated out resources into a separate
concept preemptively since it seemed like separate enough but probably
doesn't warrant being a separate concept. The result is that we have a
per RenderState in the Config which is really just temporary state and
things that must be flushed completely in the prerender. Most things
should be ResumableState.
Most options are specified in the `prerender()` and transferred into the
`resume()` but certain options that are unique per request can't be.
Notably `nonce` is special. This means that bootstrap scripts and
external runtime can't use `nonce` in this mode. They need to have a CSP
configured to deal with external scripts, but not inline.
We need to be able to restore state of things that we've already emitted
in the prerender. We could have separate snapshot/restore methods that
does this work when it happens but that means we have to explicitly do
that work. This design is trying to keep to the principle that we just
work with resumable data structures instead so that we're designing for
it with every feature. It also makes restoring faster since it's just
straight into the data structure.
This is not yet a serializable format. That can be done in a follow up.
We also need to vet that each step makes sense. Notably stylesToHoist is
a bit unclear how it'll work.
Generally scripts should not be preloaded before images but if they
arrive earlier than image preloads (or images) the network (or server)
may be saturated responding to inflight script preloads and not
sufficiently prioritize images arriving later. This change marks the
preloaded bootstrap script with a `low` fetch priority to signal to
supporting browsers that the request should be deprioritized. This
should make the preload operate similar to async script fetch priority
which is low by default according to https://web.dev/fetch-priority/
Additionally the bootstrap script preloads will emit before
preinitialized scripts do. Normal script preloads will continue to be
prioritized after stylesheets
This change can land separatrely but is part of a larger effort to
implement elevating image loading and making script loading less
blocking. Later changes will emit used suspensey images earlier in the
queue and will stop favoring scripts over images that are explicitly
preloaded
This uses the same mechanism as [large
strings](https://github.com/facebook/react/pull/26932) to encode chunks
of length based binary data in the RSC payload behind a flag.
I introduce a new BinaryChunk type that's specific to each stream and
ways to convert into it. That's because we sometimes need all chunks to
be Uint8Array for the output, even if the source is another array buffer
view, and sometimes we need to clone it before transferring.
Each type of typed array is its own row tag. This lets us ensure that
the instance is directly in the right format in the cached entry instead
of creating a wrapper at each reference. Ideally this is also how
Map/Set should work but those are lazy which complicates that approach a
bit.
We assume both server and client use little-endian for now. If we want
to support other modes, we'd convert it to/from little-endian so that
the transfer protocol is always little-endian. That way the common
clients can be the fastest possible.
So far this only implements Server to Client. Still need to implement
Client to Server for parity.
NOTE: This is the first time we make RSC effectively a binary format.
This is not compatible with existing SSR techniques which serialize the
stream as unicode in the HTML. To be compatible, those implementations
would have to use base64 or something like that. Which is what we'll do
when we move this technique to be built-in to Fizz.
This introduces a Text row (T) which is essentially a string blob and
refactors the parsing to now happen at the binary level.
```
RowID + ":" + "T" + ByteLengthInHex + "," + Text
```
Today, we encode all row data in JSON, which conveniently never has
newline characters and so we use newline as the line terminator. We
can't do that if we pass arbitrary unicode without escaping it. Instead,
we pass the byte length (in hexadecimal) in the leading header for this
row tag followed by a comma.
We could be clever and use fixed or variable-length binary integers for
the row id and length but it's not worth the more difficult
debuggability so we keep these human readable in text.
Before this PR, we used to decode the binary stream into UTF-8 strings
before parsing them. This is inefficient because sometimes the slices
end up having to be copied so it's better to decode it directly into the
format. The follow up to this is also to add support for binary data and
then we can't assume the entire payload is UTF-8 anyway. So this
refactors the parser to parse the rows in binary and then decode the
result into UTF-8. It does add some overhead to decoding on a per row
basis though.
Since we do this, we need to encode the byte length that we want decode
- not the string length. Therefore, this requires clients to receive
binary data and why I had to delete the string option.
It also means that I had to add a way to get the byteLength from a chunk
since they're not always binary. For Web streams it's easy since they're
always typed arrays. For Node streams it's trickier so we use the
byteLength helper which may not be very efficient. Might be worth
eagerly encoding them to UTF8 - perhaps only for this case.
stacked on #26753
Adds support for preloading bootstrapModules. We don't yet support
modules in Float's public interface but this implementation should be
compatible with what we do when we add it.
This PR adds a preload for bootstrapScripts. preloads are captured
synchronously when you create a new Request and as such the normal logic
to check if a preload already exists is skipped.
The bindings upstream in Relay has been removed so we don't need these
builds anymore. The idea is to revisit an FB integration of Flight but
it wouldn't use the Relay specific bindings. It's a bit unclear how it
would look but likely more like the OSS version so not worth keeping
these around.
The `dom-relay` name also included the FB specific Fizz implementation
of the streaming config so I renamed that to `dom-fb`. There's no Fizz
implementation for Native yet so I just removed `native-relay`.
We created a configurable fork for how to encode the output of Flight
and the Relay implementation encoded it as JSON objects instead of
strings/streams. The new implementation would likely be more stream-like
and just encode it directly as string/binary chunks. So I removed those
indirections so that this can just be declared inline in
ReactFlightServer/Client.
