Otherwise sockets that are 'finish'ed won't be unpiped and `writing to
ended stream` error will arise.
This might sound unrealistic, but it happens in net.js. When
`socket.allowHalfOpen === false`, EOF will cause `.destroySoon()` call which
ends the writable side of net.Socket.
This is more backwards-compatible with stream1 streams like `fs.WriteStream`
which would allow a callback function to be passed in as the only argument.
Closes#4719.
In zlibBuffer(), don't wait for the garbage collector to reclaim the zlib memory
but release it manually. Reduces memory consumption by a factor of 10 or more
with some workloads.
Test case:
function f() {
require('zlib').deflate('xxx', g);
}
function g() {
setTimeout(f, 5);
}
f();
Observe RSS memory usage with and without this commit. After 10,000 iterations,
RSS stabilizes at ~35 MB with this commit. Without, RSS is over 300 MB and keeps
growing.
Cause: whenever the JS object heap hits the high-water mark, the V8 GC sweeps
it clean, then tries to grow it in order to avoid more sweeps in the near
future. Rule of thumb: the bigger the JS heap, the lazier the GC can be.
A side effect of a bigger heap is that objects now live longer. This is harmless
in general but it affects zlib context objects because those are tied to large
buffers that live outside the JS heap, on the order of 16K per context object.
Ergo, don't wait for the GC to reclaim the memory - it may take a long time.
Fixes#4172.
Move the implementation to C++ land. This is similar to commit 3f65916
but this time for the write() function and the Buffer(s, 'hex')
constructor.
Speeds up the benchmark below about 24x (2.6s vs 1:02m).
var s = 'f';
for (var i = 0; i < 26; ++i) s += s; // 64 MB
Buffer(s, 'hex');
Move the implementation to C++ land. The old JS implementation used
string concatenation, was dog slow and consumed copious amounts of
memory for large buffers. Example:
var buf = Buffer(0x1000000); // 16 MB
buf.toString('hex') // Used 3+ GB of memory.
The new implementation operates in O(n) time and space.
Fixes#4700.
Those values, if passed to the _read() cb, will not signal an EOF. Only
null or undefined will mark the end of data, and trigger the end event.
However, great care must be taken if you are returning an empty string
or buffer! There must be some other thing somewhere that will trigger
a read() call, because there will never be a readable event fired later.
This is in preparation for CryptoStreams being ported to streams2, where
it is safe to simply stop reading, because the crypto cycle process will
cause it to read(0) again at some future date.
Make lines ending \r\n emit one 'line' event, not two (where the second
one is an empty string).
This adds a new keypress name: 'return' (as in: 'carriage return').
Fixes#3305.
This commit breaks simple/test-stream2-stderr-sync. Need to figure out
a better way, or just accept that `(function W(){stream.write(b,W)})()`
is going to be noisy. People should really be using the `'drain'` event
for this use-case anyway.
This reverts commit 02f7d1bfd8.
Always defer the _write callback. The optimization here was only
relevant in some oddball edge cases that we don't actually care about.
Our benchmarks confirm that just always deferring the Socket._write cb
is perfectly fine to do, and in some cases, even slightly more
performant.
When a datagram socket hasn't been bound yet, node will defer `send()`
operations until binding has completed. Before this patch a `listening`
listener would be installed every time `send` was called. This triggered
an EventEmitter leak warning when more than 10 packets were sent in a
tight loop. Therefore switch to using a single `listening` listener, and
use an array to enqueue outbound packets.
The refactor in b43e544140 to use
stream.push() in Transform inadvertently caused it to immediately
consume all the written data, regardless of whether or not the readable
side was being consumed.
Only pull data through the _transform() process when the readable side
is being consumed.
Fix#4667
TCPWrap::Initialize() and PipeWrap::Initialize() should be called before
any data will be read from received socket. But, because of lazy
initialization of these bindings, Initialize() method isn't called.
Init bindings manually upon socket receiving.
See #4669
mainly to allow native addons to export single functions on
rather than being restricted to operating on an existing
object.
Init functions now receive exports as the first argument, like
before, but also the module object as the second argument, if they
support it.
Related to #4634
cc: @rvagg
Fix issue where SlowBuffers couldn't be passed as target to Buffer
copy().
Also included checks to see if Argument parameters are defined before
assigning their values. This offered ~3x's performance gain.
Backport of 16bbecc from master branch. Closes#4633.
Changed types of errors thrown to be more indicative of what the error
represents. Also removed a few unnecessary uses of the v8 fully
quantified typename.
Argument checks were simplified by setting all undefined/NaN or out of
bounds values equal to their defaults.
Also copy() tests had a flaw that each buffer had the same bit pattern at
the same offset. So even if the copy failed, the bit-by-bit comparison
would have still been true. This was fixed by filling each buffer with a
unique value before copy operations.
Fix issue where SlowBuffers couldn't be passed as target to Buffer
copy().
Also included checks to see if Argument parameters are defined before
assigning their values. This offered ~3x's performance gain.
This adds a proxy for bytesWritten to the tls.CryptoStream. This
change makes the connection object more similar between HTTP and
HTTPS requests in an effort to avoid confusion.
See issue #4650 for more background information.
We detect for non-string and non-buffer values in onread and
turn the stream into an "objectMode" stream.
If we are in "objectMode" mode then howMuchToRead will
always return 1, state.length will always have 1 appended
to it when there is a new item and fromList always takes
the first value from the list.
This means that for object streams, the n in read(n) is
ignored and read() will always return a single value
Fixed a bug with unpipe where the pipe would break because
the flowing state was not reset to false.
Fixed a bug with sync cb(null, null) in _read which would
forget to end the readable stream
This is similar to commit 2cbf458 but this time for 204 No Content
instead of 304 Not Modified responses.
When the user sends a 204 response with a Transfer-Encoding: chunked
header, suppress sending the zero chunk and force the connection to
close.
Force the connection to close when the response is a 304 Not Modified
and the user has set a "Transfer-Encoding: chunked" header.
RFC 2616 mandates that 304 responses MUST NOT have a body but node.js
used to send out a zero chunk anyway to accommodate clients that don't
have special handling for 304 responses.
It was pointed out that this might confuse reverse proxies to the point
of creating security liabilities, so suppress the zero chunk and force
the connection to close.
Profiling in clustered environments doesn't work out of the box.
By default, V8 writes the profile data of all processes to a single
v8.log.
Running that log file through a tick processor produces bogus numbers
because many events won't match up with the recorded memory mappings
and you end up with graphs where 80+% of ticks is unaccounted for.
Fixing the tick processor to deal with multi-process output is not very
useful because the processes may be running wildly disparate workloads.
That's why we fix up the command line arguments to include
a "--logfile=v8-%p.log" argument (where %p is expanded to the PID)
unless it already contains a --logfile argument.
Fixes#4617.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want to receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want `server.connections` to be a reliable
number, and receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
Unfortunately, it's just too slow to do this in events.js. Users will
just have to live with not having events named __proto__ or toString.
This reverts commit b48e303af0.
Reject negative offsets in SlowBuffer::MakeFastBuffer(), it allows
the creation of buffers that point to arbitrary addresses.
Reported by Trevor Norris.
