Gyp defaults to gcc/g++ if CC.host/CXX.host is unset. This is not
suitable for environments that only uses the clang toolchain.
Since we already assume that the user will provide clang/clang++
through CC/CXX, lean against it (then drop to gcc/g++).
Also apply the same logic for link/ar for consistency although
it doesn't affect us.
PR-URL: https://github.com/nodejs/node/pull/6173
Fixes: https://github.com/nodejs/node/issues/6152
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit tries to make it simpler to add unit tests (cctest) for
code that needs to test node core funtionality but that might not be
appropriate as an addon or a JavaScript test. An example of this could
be adding functionality targeted for situations when Node itself is
embedded.
Currently it was not as easy, or efficient, as one would have hoped to
add such tests. The object output directories vary for different
operating systems which we need to link to so that we don't have an
additional compilation step.
PR-URL: https://github.com/nodejs/node/pull/11956
Ref: https://github.com/nodejs/node/pull/9163
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit adds lldbinit files from upstream V8 and also adds these so
that they get installed when `make install` is run.
Original commit message:
[tools] add lldbinit
The goal of this commit is to add the equivalent to gdbinit but
for lldb. I've tried to replicate the commands as close as possible
but I'm unsure about the jss command and hoping to get some feedback
on it in addition to the bta command which I'm not sure how/when
this could be used. This is probably just inexperience on my part.
The lldbinit file can be placed into a directory prefixed with dot
(.lldbinit) and the python script is currently expected to be in the
same directory. The path to the script can be changed manually if
needed as well.
NOTRY=true
Review-Url: https://codereview.chromium.org/2758373002
Cr-Commit-Position: refs/heads/master@{#44136}
PR-URL: https://github.com/nodejs/node/pull/12061
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
When configuring --without-ssl and then running make install
openssl headers will be copied from deps/openssl to the target
installation directory.
This commit adds a check for is node_use_openssl is set in which
case the headers are not copied.
PR-URL: https://github.com/nodejs/node/pull/11766
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Brian White <mscdex@mscdex.net>
Unset NODE_PATH environment variable when running tests.
On Ubuntu 16.04, some users experience test failures due to internal
libraries being installed in /usr/lib/nodejs/internal and NODE_PATH
including /usr/lib/nodejs. Tests that expect internal libraries to be
off limits without the --expose-internals flag will fail in this
situation. Currently, those tests are test/parallel/test-repl.js and
test/parallel/test-internal-modules.js.
This situation seems to (probably) be caused by some
not-entirely-uncommon package that gets installed.
Regardless, tests should ignore the user's NODE_PATH. (NODE_PATH is
tested in test/parallel/test-module-globalpaths-nodepath.js and
test/parallel/test-require-dot.js.)
PR-URL: https://github.com/nodejs/node/pull/11612
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Refs: https://twitter.com/trott/status/835729396900061184
Replace node-weak with a small hand-rolled add-on. We can now drop
node-weak and nan, reducing the size of the source tree by about 750 kB
and the size of the tarball by about 150-300 kB.
PR-URL: https://github.com/nodejs/node/pull/11239
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Add a compile_commands.json generator for use with clang-based tooling.
Pass the (undocumented) -C switch to configure to make it generate the
files in out/Debug and out/Release.
PR-URL: https://github.com/nodejs/node/pull/7986
Reviewed-By: James M Snell <jasnell@gmail.com>
https://github.com/nodejs/node/pull/11086 had introduced a regression
that broke command line options processing for tools/test.py.
Basically, it made tools/test.py discard the command line argument that
would be passed after `--abort-on-timeout`. For instance, when running:
```
$ python tools/test.py --abort-on-timeout path/to/some-test
```
all tests would be run because the last command line argument
(`/path/to/some-test`) would be discarded.
This change fixes this regression.
Refs: https://github.com/nodejs/node/pull/11086
PR-URL: https://github.com/nodejs/node/pull/11153
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Currently, when a process times out, it is terminated by sending it the
SIGTERM signal. Sending SIGBART instead allows the operating system to
generate a core file that can be investigated later using post-mortem
debuggers such as llnode or mdb_v8.
This can be very useful when investigating flaky tests that time out,
since in that case the failure is difficult to reproduce, and being able
to look at a core file makes a big difference.
With these changes, passing the --abort-on-timeout command line option
to tools/test.py now sends SIGABRT to processes timing out on all
platforms but Windows.
PR-URL: https://github.com/nodejs/node/pull/11086
Ref: https://github.com/nodejs/node/issues/11026
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
As it is, each line in the deprecation heading which are wrapped at 80
characters in the *.md files, are shown in different lines. For example
> Stability: 0 - Deprecated: Use
> `Buffer.from(arrayBuffer[, byteOffset [, length]])`
> instead.
is shown in three different lines. This patch replaces the newlines
with space characters, so that the output will be in single line.
PR-URL: https://github.com/nodejs/node/pull/11074
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Adds Google Analytics tracking script to all doc pages when
`DOCS_ANALYTICS` is set when running `make`:
```bash
$ DOCS_ANALYTICS=<GOOGLE ANALYTICS ID> make
```
By default (when `DOCS_ANALYTICS` is not set), no tracking scripts are
included.
It respects "Do Not Track" settings end users might have in their
browser.
Also changes make target `doc-upload` from depending on the
`$(TARBALL)` target, to only depend on `doc` directly.
PR-URL: https://github.com/nodejs/node/pull/6601
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
We have been stalled on ESLint 3.8.0 for some time. Current ESLint is
3.13.0. We have been unable to upgrade because of more aggressive
reporting on some rules, including indentation.
ESLint configuration options and bugfixes are now such that we can
reasonably upgrade.
PR-URL: https://github.com/nodejs/node/pull/10561
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
The `no-useless-regex-char-class-escape` custom lint rule was introduced
as a less aggressive alternative to some enhancements that were
introduced into ESLint. Those enhancements were blocking us from
updating ESLint. However, they have since been relaxed and the custom
rule is no longer needed. Remove it.
PR-URL: https://github.com/nodejs/node/pull/10561
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
* Simplify regular expressions (see below)
* Remove unneeded `parseYAML()` wrapper
* Remove unused callback argument
Regular expression simplifications include:
* Changing trailing `*?$/` to `*$/` because non-greedy matching to the
end of a line will not change behavior
* Change regexp beginnings like `/^(?:property:?\s*)?[^.\[]+` to the
equivalent `/[^.\]]+`
* For regular expressions changed per the above, remove
case-insensitivity if it no longer affects the regexp
PR-URL: https://github.com/nodejs/node/pull/10442
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Italo A. Casas <me@italoacasas.com>
Currently, there are a number of popups that get displayed when running
the tests asking to accept incoming network connections. Rules can be
added manually to the socket firewall on Mac OS X but getting this right
might not be obvious and quite a lot of time can be wasted trying to get
the rules right. This script hopes to simplify things a little so that
it can be re-run when needed.
The script should be runnable from both the projects root directory and
from the tools directory, for example:
$ sudo ./tools/macosx-firewall.sh
Fixes: https://github.com/nodejs/node/issues/8911
PR-URL: https://github.com/nodejs/node/pull/10114
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
